tire

I have a nbs gmc sierra with a 4/6 drop I want to put my stock 20s back. What tire size should I run .what do you guys think

Just realized..... I never started a "build thread" for the ol' HD!!! So here we go: Had this good ol' girl, 95' K3500 with 454/4.10s.... I went with my cousin to look at new 2500HDs for him in March 2002.... and I came home with this.... March 27, 2002 Three days later...

Long story short, bought some Americana paste wax once upon a time and was never truly happy with it due to not being able to open the container and the actual wax breaking up and cracking constantly even though it was always stored in a temperature controlled environment (disclaimer, this is...

As my first real truck purchase, i picked up a 2013 Chevy Silverado 1500 Thunder Edition. Looking for suggestions on the exterior, its my daily driver so not going too crazy. First thinking about a 2.5 inch lift so I can put a bigger/aggressive tire on it, along with some new rims. Thinking...

So I was working up in Reno this past week, and found this thing on CL as I was looking up cars for my boss to get his son to buy. I told my boss you need to pick this thing up, it's way under market value. I ended up telling him, you buy it or I will, and he ended up not buying it. So true...

I was thinking about going from a 4/6 to like a 5/7 or 8. My question is up front I currently have 2 inch drop coils and 2 inch drop spindles, can I just cut my coils to drop it down? If so how much would the ride differ from now? And my tire size is 275-40-20 would that be fine to go that low...

Looking to sell my 2010 Silverado LTZ Crew Cab Short Box 4x4. Rebuilt Title. 141,000 KMS/ About 88,000 MILES (Canadian vehicle) Fully loaded with the exception of: Navigation, Sunroof & Sliding Rear Window Located in Toronto, Ontario, Canada Interior Leather, Heated, Power and Memory...

As the title states, I'd like some help picking some new wheels for the truck. What I'd like: 20s or 22s Painted or low-maint. finish (will be on all the time and see salt in the winter) Fatctory offset or close to edge of fender. Under $1000 total. On tires, I'd like to stick with stock size...

2006 Sierra. I did this customers Yukon last year as well. This time he wanted his Sierra buttered up. Its his daily driver so as you could imagine there was quite a bit of contaminants and some refinery fall out from around the area. This truck already came in great shape so there wasnt a huge...

This truck came in for a quick polish/seal exterior only detail. Below are the pics in order. Its hard to photograph Silver Birch through the changes of the paint but i can say it made a large difference in the depth and overall appearance of the paint. Its also now protected for daily driver...

What's up fellas. Those who follow me on IG know the diesel is gone and has been replaced with this. I had my reasons... This one is a 03, 4.8 2wd arrival blue, 3:73s yada yada Day I picked it up Cleaned it up and swapped wheels from the 14 and got it tinted 10% sides 5% rear Got the 4/6 on...

Being new to ls engines, everyone has to start somewhere, so I set a rather low goal of around 350hp. Right now I am sitting bone stock as far as engine and trans goes. Is my goal reachable without going to far into the engine? What are my options? My pockets aren't deep enough nor is my spare...

Hey everyone I'm new to the group and I'm needing a little help. I've got a 77 c10 2wd lwb and I'm going to put a 3/4 drop what size wheels and tires should I run? I was thinking 20x10 rear and 18x8 front. Anybody think something different would look good?

So it's time to pick out a set of tires. My job has discounted pricing so I'm going that route. I have researched tire sizes and it looks like I will be going with 285/50/20. They measure out to 31.2" which is .2" taller than my current size. Truck won't go any lower for a good while and its...

Here is my How to on retrofitting the factory Denalis. My write up is a little different as i was re-retrofitting, so removing the projector from the housing is similar but a little different. the parts you will need are (2) Aftermarket Morimoto 6.0 Projectors (8) 8-32 bolts that...

Currently as my truck sits Im at 4/6 drop with 275/45/20, its a 07 classic Silverado rcsb. 2" Belltech spindles and dbrods 2"coilovers up front, Belltech flip kit out back with notch. I recently moved to Oklahoma City and find that the roads are rough as sh*t. Feel like the truck is getting beat...

99 nbs. When it first shifted i got service 4wd light amd no lights on the switch. I shut the truck off and started it again, 4lo light is on and the tcase is in 4lo. I push the 2hi button, it flashes, i hear the encoder motor try to make the switch twice but it fails every time. Its my dd and I...

so i strolled across this on my local reck neck fb group. and was kind of intrigued i think the bumper almost looks better on the nbs then the 2014+ models. thoughts?

Had this one come to me in pretty rough shape. Wanted a polish, interior cleaning. Strip Wash Clay AIO polish Sealant PERL tire dressing Under Carriage spray In N Out spray for plastics On to the pics! Before: After: It was a nice...

My hood is in desperate need of a new paint job and while I was out obtaining prices to get it painted, one of the sales associates asked why not wrap it? So I started thinking about it and now I cant decide if I paint it or wrap it... The truck is Olympic White with esky handles, complete...