I'm new to the forum here so i guess this is a good place to start my thread. I'm more indecisive than anything so a bunch of stuff may change but I got some ideas lines up for now. I'll update the thread with pics later on.
I want to keep the truck just leveled and it already has an rc 2"...
2012 gmc Sierra 1500 crew cab
Front
2" spindles
2" springs
Rear.
7" flip kit with belltech street performance shocks.
I had a 4"/5" drop and it was even. Now I wanted a 4/6 I lowered it and now my truck is not even.
From top off fender too top of tire
On the front driver side I have...
So I've decided to start a build thread for this customer's truck.
2006 intimidator SS
The trucks came 2wd in this year and they are torsion bar suspension.
Parts
Unparalleled Customs front kit
Unparalleled Customs 3 link
Accuair elevel with ilevel
Dual Viair 480's
8.5 gallon tank
Built to lay...
So last week I placed an order with SCG and was asked if I could provide a review if I was provided a product. I gladly accepted and was able to use it this weekend on a 2016 Mustang I detailed. Wont go into details as to wat/how this thing is or works but its supposed to be a replacement for...
For all of you that don't know I'm back in a crew cab. Plans for this one are straight to bags. Figured id go ahead and start this thread since I'm collecting parts. Got a York 210 and nfamus 3 link on the way. Rest of the plans include infamus front kit, raceline stunna 24x10 on 275 30 kuhmos...
Looking for pros and cons on each. Pretty much set on one of the two in a 285/65/18 />Looks like they are pretty close in price and the STT Pro being a few bucks cheaper at a few places
Sent from my SM-G900R4 using Tapatalk
I have a small ding on the side of my car, then entire blemish is smaller than a dime. It is noticeable in the black, however. What's the best way to fix it? I know I could fill with a little putty and paint it, but I don't want to do that. I've been trained to hate bondo, and want an all metal...
I have an 03' Z71 with keys (2" leveling kit) and am installing a 3" BL next week. I am also purchasing 18" rims soon. I want to know if I get the 18" rims possibly 10" wide how much offset do I run (-12 or -24) with no backspacing before they get to gawdy looking? Also with these rims and...
Bagging my truck over the winter, just wondering where everyone hides their compressors. Going with 2 viair 480's and please leave the "EDC FTW" stuff out of this. We know they are the bee's knees but this is about compressors. Thanks guys. Oh my plan is to still have exhaust run out the roll...
New project, which you guys may find more desirable than my truck, since us longed guys get no love here lmao...
Updated 1/8/18 since Photobucket doesn't work anymore, here is an original picture of the truck in it's previous life as well as the reg cab before it's "makeover". I started this...
Anyone have any info on what tire size would be good for an NBS on oem 20's with a 5/8 drop ? Any help would be cool, thanks
Sent from my HTC One M9 using Tapatalk
So i picked up a truck a little under a year ago and a few months ago i got around to getting the lift rims and tires on. I bought the lift rims and tires new from a local dealer. after i installed the lift and drove it i noticed that the truck hopped very badly around 50MPH. I was hoping the...
I know there's one on another site, and didn't see one here, but if you have a GM and need a part number, post the VIN and tell me what your looking for.
If this exist here, delete it, but I figure I've helped a few people on here before so I'd offer up my service in a central location
Edit: I...
Had this customer come and ask for an exterior only detail because hes selling it. We kept getting pushed back because of the weather but we finally had a nice sunny day. This thing was as expected for a 97 and for a used land cruiser. Interior looks like it rolled off the showroom, just normal...
So, I'm pretty much limited to using stock 17in GMC wheels for the time being.
With that being said, up front I have 7.5in, P27 code wheels. Out back is 9.5in (had them widened by Weldcraft).
I have 275/60's on all 4 corners.
The problem is that the sidewalls on the rear are "beefier"...
Weld Evo Axis chrome wheels
20x9”
275/55/20 Yokohama Parada Spec-X tires
Never driven in winter, never seen salt. Great condition.
Includes lugnuts, does not include tpms sensors.
Approx. 20,000 miles on setup. Approx. 4/32" tread depth remaining on tires.
$900 obo for wheels and tires.
$700...
Probably going to lower my truck before it ever gets bagged. I'm having problems finding lowered nbs rcsb on 24s. So lemme see what pics yall have. Emphasis on rcsb and nbs as that's what I have and I'm generally not to crazy bout the way they look lowered on 24s.
Like the title says, looking for suggestions. Cat back, S/I S/O, going to dump it right over the axle. Don't really want a redneck rasp, but a little drone is OK. Iirc factory piping is 2.5"
As some of you know about 2 years ago I sold my 2010 Sierra and since then went through a few vehicles lol. I sold the Sierra and got a 2014 5.0 mustang and within 6 months I sold it and picked up a Lbz which after about a year I realized it wasn't what I wanted. But I picked up a 2014 Silverado...
20's
20s
20x10
all terrain
auto
awesome
black
build
control
emblem
grill
lbz
leveled
offset
paint
pics
post
sierra
silverado
suggestions
tiretires
truck
wheel
wheels
Let me start off by letting y'all know when I bought it. 2 years ago for my 1 year anniversary being married, my wife bought me my 2011 Silverado
$25,000 with only 24k miles.
Bought it from a dealership that was about to send it to the auction. As soon as I got I tried finding some info on it...
This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
By continuing to use this site, you are consenting to our use of cookies.