Well its been a long way comin but i finally did it thanks to tukn4s an bagged00 for some advice on what i need
Will be goin with nfamus setup up front later down da road for now just gon look for some 24s and needa find a way to get the gas tank completely in cuz still stick out...
So here's my issue.
I've decided on a 2/4", and I'm going to use DJM LCA's to get the 2" drop up front, however, since I don't have the proper tools to safely pull the rear of my truck apart to do a flip kit, and labor rates are RIDICULOUS, I'm looking at a cost effective solution to drop the...
Well as most of you guys know I'm formally known as 07CCSB. I built a 2007 Silverado a while back and had my build thread on here.
This thing was lowered and lifted multiple times lol couldn't make up my damn mind so I finally dumped a lot of money into it and didn't get shit out of it...
Looking to sell my 2006 2500HD GMC Sierra LBZ SLE2 86,8xx miles and goes up each week. Only drive about 120 miles a week generally. Bought the truck all stock in 7/2013 with 59k miles and has been deleted with all the performance stuff done since then. Truck was originally 2wd when I bought it...
Looking to go a different route and sell my current setup. I would like to sell it complete as the items are proven to work well together. All items are in San Jose, CA.
- Deaver J1 Mini Pack ~2" lift
- Synergy 3228 6" Boxed Race Shackle (Mig)
- Synergy 2.0 Air Bump Cans
- Synergy Air Bump...
Hello! I have read pages and pages of threads to the point where I am more confused than before I started. Here is what I have and want to do. 2005 Silverado 1500 crew cad 2 wd with 1 piece aluminum drive shaft. I have decided to go with the Mcgaughys 5/7 drop and run a 22x9's wrapped with...
2012 gmc Sierra 1500 crew cab
Front
2" spindles
2" springs
Rear.
7" flip kit with belltech street performance shocks.
I had a 4"/5" drop and it was even. Now I wanted a 4/6 I lowered it and now my truck is not even.
From top off fender too top of tire
On the front driver side I have...
I got a 2012 gmc Sierra 1500 I got a 5/7 drop
Mcgaughys 2" spindles
2" springs
Belltech adjustable shocks
Rear 7" flip kit
Belltech shocks
Is getting a rear sway bar worth it???
Every time I turn I keep hearing a popping noise from the front. Anyone have and idea what could...
Before: ECSB Springs with 1" daystar lift spacer & shackles set on 2" ( you read that right!!! to sit level I had to lower the rear 2" and raise the front 1"... ) 285/50/20
After: 2" Drop Spindles with 1" drop ECSB Springs and moog Isolator ( factory height ) & Flip Kit out back set at 5"...
So this weekend I installed a flip kit on my 2005 crew cab Silverado! Looks insane, but has a vibration ( go figure right? )
I have a 3* shim in it right now and there is not vibration while city driving ( as far as I can tell anyway ) but there is a vibration at wide open throttle from...
I've been out of bagged vehicles for a couple year. Been doing the static thing for awhile. Last time I was buying bags it was re7's. I've been reading around and it looks like they slam makes different bags now. Also seen a lot of people running dominators.
So what are you guys running and...
Hey everyone
I am not new to forums, or even nee to automobiles. Iv grown up and spent a lot of my time (and money) on cars. My grandfather used to drag race, and owned a machine shop. My father has been a mehanic his whole life as well. Its in my blood, its a passion of mine I hope to one day...
So i picked up a truck a little under a year ago and a few months ago i got around to getting the lift rims and tires on. I bought the lift rims and tires new from a local dealer. after i installed the lift and drove it i noticed that the truck hopped very badly around 50MPH. I was hoping the...
I lowered my 2011 crew cab 1500 2/3..Thinking of changing the rear shocks to some belltech or something.Will I really notice much from my stock shocks? Don't wanna waste money if not needed..thanks
i have a 2/3 ,drop spindles and shackles with blocks removed.is it really that noticable of a difference to spend the money on a flip kit to go down another inch to 4 or should i just get a 5" kit for the back?dont haul alot but may buy a boat so would look into air helpers if needed..showing 2"...
What size airbags do you have up front and do you run it without the shocks? On my 09' tahoe I currently have the avs(KP) front bag brackets and slam re7's with no shocks and the ride is bouncy. I want to add shocks but wont be able to since the control arms are made out of cast. Did you guys...
Well I'm back in a GM and it feels so good. Was looking for another 3rd gen Dodge, but came to reality and decided to go back to class.
Well I bought it completely stock on October 13, 2015 with a little over 64,000 miles.
My plans:
Remove Steps. Done.
Remove valance. Done.
Remove/sale tool...
I have a pair of Fox 2.0 performance series shocks for sale. Ran them for a year and just removed them after lowering my truck .Will fit 1999-2006 Silverado/Sierra 1500 2wd and 2007+ 1500 2wd and 4wd. Still in good condition , asking 200$+shipping obo
Link for reference:
Silverado Fox...
I have a 2005 Sierra Crew Cab bagged with ART coolride front setup with lower arms and ART AirBar in the rear.
I need advice on what shocks to run in the front. I had the ART RQ shocks, but they are no longer usable. Set them too stiff and destroyed them.
I also need advice on what size tire...
This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
By continuing to use this site, you are consenting to our use of cookies.