shocks

It's a 2010 with a 5.3l engine and 4wd. I've lowered it 5/7 and done other small things to it since like led's, tint, etc. When I first got it a couple months back. Put in some leds Then I got all my parts from Belltech and McGaughys consists of belltech 2" lowering spindles...

Belltech released their part numbers for the 2014 Silverado/Sierra 2WD this week. The NNNBS (2014) will use the same coil spring, spindle, front sway bar and rear shocks as the NNBS (07-13). Belltech did design a new flip kit. The new flip kit for this model truck corrects the axle position and...

About to order the parts I'm missing to drop le crew back down, need some shocks, I'm partial to Monroe sensa trac (sarcasm) but someone give me some options Sent from my iPhone using Tapatalk

I have a 2011 Sierra with a 2.5" level and 35" tires. The tires don't rub any where except on the sway bar if the wheel is turned all way and held all the way. So I searched to see if there were any fixes for this, and saw that someone said to remove it and its not a big deal. So is it really...

2" lowering springs 2" spendals airbagies "for the low low" GALAXYS2

ordered kit from suspension source. installed over the weekend. question is, how long will it take for the front to settle?? reason I ask is because the rear is tucking wheels. but front is up like 2 inches from the wheels. not sure if this is normal. if I need to cut the lowered shocks or if...

99 silversdo 4x4 285/75/16s I want to run a zone off-road 1.5 body lift and rough country full leveling kit which should I do first ?? What's the cons ? And with the level kit I was gonna get the steering stabilizer and the hd tie rod sleeves to save the front end a little more & would I have to...

i bought an 07 lbz just under a month ago, i've looked around and can't really decide what i want to do with it so i figured here i could get some more input. i know i want to - 4 inch lift or so -33s, not really feeling 35s because i tow a skid loader/ baby excavator weekly - full exhaust -...

People suggested posting more/better pics of the Avy on my introduction thread...well I'm no photographer but I'll post what I got. Things I've done since I got it last December: tinted windows, color matched door handles and mirrors, debadged, HIDs, vinyl wrapped door pillars and bowties, 24"...

I have a set of brand new Rough Country rear shocks that came with my 3.5" lift kit. They have never been installed and are still tied together. The part number is 650380 you can text me at 214-212-0046 or just message me on here. $60 for the pair Located in Coppell, Texas.