Pretty here and don't really have time to post often, but just wanted to share progress on my truck. It's a 2010 2wd LS. Bought it bone stock aside from having side steps and a retrax bed cover. I initially added HIDs, LEDs throughout, Rockford fosgate door speakers, 2 rockford fosgate 12s and...
I've got a 06 ext cab silver I want to go with a 3/5 on 275/45R22s but if I can get away with a 4/6 on same wheels and tires without rubbing or having problems going over speed bumps I would go with that. Any idea or pictures would help a...
Hey everyone, I have a set of wheels picked out but I am not sure if they will work. I have a 2009 Silverado with a 2/4 drop. The wheels I would like to get come in either 18mm or 00mm offset and I am not sure which would be better or if they will work at all. I would like to run a 275/55r20...
Did some trading for these a few weeks ago, after getting the curb rash out and tires mounted there is still some waves in the lips from prior repairs, and I'd like to change the width and offset on them anyways. They are an old 3 piece so Hot Rods by Boyd cannot help unless I want to buy 50 new...
I am selling my 22x9 intro "El paso" wheels. They are polished lip with brushed centers. Tires are 285/35/22 pirelli's all around so these can be used for 2wd or awd/4x4 applications. They have no curb rash or bends, and are in great shape. The rears have a different offset, so if your truck is...
Well the white truck is gone and I picked this 2016 Silverado up, single cab 5.3L with just about everything you can get in a single cab
Plans are
4/6 or 4/7 drop on 24s with some basic mods to clean it up and then just drive the shot out of it and enjoy it
Already have windows tinted 5%...
Was on my 4wd at 4/7
Belltech struts. Rings not pictured
Street edge spindles for 2/4wd
Moog uca with belltech offset bushings
Belltech flip kit with adjustable hangars
Belltech rear shocks
Mcguaghys helper bags
I'll let it all go for 700 plus shipping on your dime. If your somewhat local we...
For sale: 2006 silverado
215xxx miles. If you're waiting for it lets just get this out the way, that is the downside of this truck it has high miles. Located in Maryland but this truck is from texas. No typical chevy rust, has only been in rust belt since 2013 and I do take care of it.
5/8...
Hey guys, I know I don't post much on here any more but I have a question I'm not too well versed on. I need to get a camber kit for the front end of my 2011 Silverado. It has a 5" drop up front with McGaughys spindles and Belltech adjustable struts. The wear on the inside of my tires is horrid...
I'm new here, so I'm sorry in advance if this subject has been beaten to death. I stumbled upon the forum looking for wheels that would fit my bagged 2011 Chevy Silverado. Been searching with no luck. Seems like I can't find a solid answer, or get mixed responses that contradict each other. What...
Posting for a buddy. Came off his 2015 Sierra
Cantact Lane 3184610044
Located in logansport, la
Bell tech 5/7 drop for sale
The drop can be a 6/8
2" drop spindles,springs
new adjustable struts/rear shocks
Rear flip kit
Hancook 275/45/20 two brand new
Two 5k miles.
$650 for the drop
$450...
Ok, so as many of you know, I keep bending these soft as hell 22s. Well I found yet another bent wheel last night, making #5. I'm fed up, so I'm getting rid of them.
This is where CGM comes in - I need some help figuring out what direction I need to go. I'm basically down to 3 options and I'm...
What exhaust systems are you guys running on your NNBS trucks? I've gotta 2011 Silverado with the 5.3. Any suggestions on full kits? Muffler types? Anything will help. Thanks. And if you have a sound clip post it up!
Sent from my iPhone using Tapatalk
Mmm, so I bought my Dads 2011 Sierra off him. Needed a crew cab with the growing family and excited to jump on the opportunity to have a one owner 6.2 SLT.
Past GM vehicles: 90 RCSB, 95 Tahoe, 98 RCSB, 04 ECSB
Current GM vehicles: 07 Tahoe, 11 CCSB
Planned modifications:
Debadge - Done...
Ok guys I'm new here and need some help. I've got a 2011 Chevy Silverado crew cab that I'm wanting to lower around 4/6 and trying to avoid notching the frame. I've seen several different kits and lots of forums on this subject but they're all a few years old. I'm looking for more up to date info...
SOLD: Austin Texas. 20x8 Centerline Sniper
SOLD...
Figure I'll give this a try here to see if anyone is interested.
Selling my centerline sniper 20x8 wheels. According to the centerlines website they have a 5" backspace or +12 offset. These are great wheels and look really good when...
Well dont know if this is the thread to place this so correct me if im wrong
im baggin my truck (2001 silverado single cab) with a 4 link triangular in the back my question is do i need to purchase a fuel cell or can i move mine around anybody got pics or ideas they can give me
thanks in advance
I think I have made my mind up on wheels but want some input. Anyone have an opinion either way on these two or experience with them? I will be running a 22x9 with +30 offset and 265/35/22 toyo proxeys. They will be on year round in Indiana so we may have a heat wave one day followed by a...
Hello! I have read pages and pages of threads to the point where I am more confused than before I started. Here is what I have and want to do. 2005 Silverado 1500 crew cad 2 wd with 1 piece aluminum drive shaft. I have decided to go with the Mcgaughys 5/7 drop and run a 22x9's wrapped with...
8x6.5 17x10 weld racing wheels. great condition. i have 5. the spare is more of a 0 offset and also has some pitting. the other 4 are in great condition. will polish and get better pics. located in southern california. asking 750obo
Sent from my iPhone using Tapatalk
This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
By continuing to use this site, you are consenting to our use of cookies.