noise

Seafoamed my truck this past weekend through break booster hose. Drove 150 miles to atlanta after. Got to apartment, went to leave and cranked truck up and it has a rough idle, flashin ses light, and seems the be miss firing at all rpms. I disconnected battery, no help. Will get codes read...

Looking for info...what do you have and why?

Hey guys, I have a clicking noise coming from under the dash near my drivers side A pillar...it only happens when the AC is OFF. Any idea what it is?

I told Swampfox I would do this for him - so here you go for your reference. Here are the tools you will need - 15mm Socket on Ratchet or 15mm Ratchet wrench and of course super secret Stage 2 Lithium grease with Molybdenum nano particles Step 1 Remove bolt holding the shafts together...

welp. being apart of gm forums for the last couple of years has really helped me, because you all know i'm a ford guy and the GMC is my dads. but now i need y'alls help on the GMC. my mom pulled into the driveway today while i was outside messing with my ranger and the truck was groaning. i knew...

Didn't see a thread so made one. Post up any pics of you getting pulled over, etc. Got pulled over for swerving (swerved to miss a pothole I knew was coming up). Cop was nice, said they were cracking down on DWI's and warned me to watch out for the trooper down the road. Wasn't there 3 minutes...

I've got an 08 CCSB 4x4... squealing coming from passenger front. Wonder if it's a wheel bearing or hub?

I will be doing this tomorrow, other than torching them, any other tips or tricks? Going to buy a ujoint press, because my truck hates me, and I am sure the socket trick won't work! Or just use a ball joint press?

copying this from another forum since im fucking lazy... how it started 2000 f250 7.3l 10.5" procomp lift with dual fox resis up front.single fox in the rears 40x15.50r22 toyos m/ts back windows were limo tinted red which has already been removed fox steering stabilizer as well all the...

Spotted this today, it's a 6" BDS and 3" BL running on 38x15.50x20 Kumho KL71's. I know the Kuhmo's tend to run narrow, these are really (14.3" wide on a x12 rim and 37.8" tall) So they're really a 13.50 like Mud Grapplers/ Toyo MT's run that wide in a 13.50. I LOVE LOVE LOVE the stance of this...

I got this amp for my birthday, 1000 watt virtual reality sound labs vr3 amp 4.1 channel. Just hooked it up in the truck. I am getting motor noise through my front door speakers which are powered by the amp. Only happens when the motor is running. Have checked the ground, power wire...

I am selling my intake off the wife's Tahoe. It is the Sprectre CAI part number 9900. It makes too much noise for my wife so I am going to go with the Air Raid Jr. Intake on it just like I have on my Denali. Everything is there except for 1 bolt that stabilizes the intake on the heat...

Well I have a 2004 Yukon Denali that seems to have the dreaded front end noise associated with carrier bearings going out. I called a few shops and they want between 600-950 to replace all the bearings in the front end and that just seems insane to me. I was wondering what was the normal going...

Since I won't be getting my truck until later this year, I figured I'd share my brother (Daniel)'s truck. This is the truck I've put MANY hours in to with my brother and although it's not a show truck, it's a pretty sweet truck. Keep in mind it's his dd and his toy! 1997 Chevrolet K1500 Z71...

besides the obvious cam/lifter/springs, what else? gaskets: intake water pump timing cover head need complete breakdown so we can get it ordered today

started up the tahoe yesterday morning to go to the store, got a nasty rythmic tapping sound coming from the top end, kinda like it was low on oil, a couple months ago I had the same problem, but at that time it had consumed 2 qts of oil, topped it back off, sound went away, never came back...

I've looked through the exhaust clip sticky and I have a couple of questions dude bros. I've got a Dynomax Bullet dumped under my truck after the axle but I think I'm wanting something quieter when I'm crusing on the freeway, i know there are a lot of different opinions but I would appreciate...

I have noticed that my interior noise is pretty loud on the interstate. Wanting to quite it down a little bit. I have been reading a few build threads and on the internet about using sound deadening mat of some sort. So please tell: What did you used? How you like it? How much material did...

Wheels that are on it 17s. Id like to bring it down 2 inches and stagger wheel sizes with 19 in back and 18 in front. Id also like to put some wheels on it - I think the TT2s are well over played. But I have no idea what would look good on the car - Im open for suggestions. This is the best...

My truck: 04 ccsb 2wd silver birch COILOVERS :D 3.5" block in rear only 16x8 black rims (mistake [3.5" bs]) 285/75/16 Dueler revo2s (mistake #2) 12" Dynomax Bullet (dumped) sounds awesome k&n (meh) corvette servo cleared headlights debadged and demolded Denali cluster Single din radio with...