lifted

anyone know of a 15x10 6 lug wheel? Neighbor wants some for his K10. The 15x8 are too narrow for what he wants, and he wants to stick with a 15". He's wanting something that's pretty much like the stock rally wheel. I found some on ebay, but not sure they will work. Or should he just have...

The other day I was doing a wheel/tire swap on the Sierra when I noticed while it was on jackstands there was a lot of lateral play when I would lift or pull on then axle shafts. Enough play to cause an audible clunk when lifted and let go. Although my axle seals have never leaked fluid, I...

First day I got it in October 2012 About 6 months months after I bought it. Everything was the same lol Leveling keys installed and cranked about 3/4 of the way. Shaved the tailgate Got some black 17 inch wheels. It stayed at this stage for a while since I couldnt make up my mind up...

I have a 2005 Crew cab and it currently has a gansta drop ( cut springs, shackles and center leaf removed ) that sits about 2/4ish. I want to add the the leaf back and possibly get a flip kit. I want to use a mcgaughys or belltech kit but they only offer a 4" or 6" drop with their flip kits...

My 2500hd Build up so far. - Chevy Truck Forum | GMC Truck Forum - GmFullsize.com just to get you guys caught up to now, you know how everyone looks back at their yearbook pictures and are just like ahh what the hell, so please spare me the grief about all the nonsense with my truck in the...

New here, found this site through another forum (GMFS). Some of you might recognize my truck: Current mods are: Exterior: RC Leveling Kit 20x10 Ultra Predators 295/55/20 Nitto Trail Grapplers eBay Cleared Headlights OEM Foglight Kit Morimoto 5k HIDs in Headlights and Fogs DL3 Mirrors 6k...

I always told myself if I ever bought a 3/4 ton diesel it would need to be 4wd, just because lol. Well I found my truck(06 CCSB LBZ) that was 2wd, low miles and really clean and I couldnt pass up the deal. So I settled for 2wd. I recently found a guy selling a totalled LLY. He cut the frame off...

So the obs is lowered. Supposed to be 4/7 but ended up with 3" up front (due to baby motor) so lifted the back up an inch. Currently 3/6. DJM 2" spindles DJM 2" springs DJM Flip Kit DJM Calmax shocks I know I altered the suspension so I know it's supposed to ride different. That's not my...

Ok this is my build copied from gmt400 so it might be a little rough. Ok so heres the starting point guys, Its a 95 with no rust except on the bed rails and a perfect leather interior except of course the drivers seat is torn. I alread got a body lift tires rims and 2" blocks on the way. Ill...

Welp, it happened. Just a hair over 100, driveshaft blew. Kinda scary, trucks seems fine with the exception of not going anywhere. Now just waiting for some buddies to call back and hopefully give me a tow back to Sanger :P Anyone know of a driveshaft for a 2004 silverado 1500 crew cab for...

Selling my fender flares off my truck. Has a 1 or 2 small spots that have fine marks that could be buffed out very easily $200 Color is silver birch Located in weatherford tx Buyer pays shipping Ill get pictures up after work

Well most of you know I picked up a new truck, a white 2006 GMC Sierra Z71 crew cab 5.3, 4.10s, just passed 75k miles on the way home LT2, charcoal cloth, buckets/console, Bose, steering wheel controls I bought it with level keys, NNBS GMC 17s, like 30% Terra Grapps, oldddd tonneau cover and...

Hey guys figured I would finally make a build thread of my truck. This was the first pic I took of my truck, 20" chrome ltz's, 20% tint 6k hid highs and lows and led tails. Did a few mods next lowering the back 1.25" then lifted the front a total of 3" traded the ltz's for a set of 24"...

I got my new 2014 street scene roll pan in yesterday. I called my cuz over so we could do a check fit install before it goes to paint next weekend. please forgive how dirty the truck is. i got a huge hole in my drive way filled with dirty and rocks that i have to drive over every morning...

Even though the majority of the build is done, I need a place to consolidate the pictures and what not.. The truck was involved in a wreck back at the end of March, and it sat like that for about a month. Finally got the check from my insurance company so I ordered everything I needed to...

well im sure most of you know that I bought james truck now. left Monday morning, got back Tuesday night. bout 11.5hrs one way. it was 2 very long days. loven the truck feels good to be bak in one. few little things I gotta fix but over all its not bad. heres a few pics after washing. I took the...

Hey guys, the time has arrived for me to sell the truck. Besides a few listings locally I'm working on the eBay listing as well. I'll post the link up for that once complete. For more info you can go thru the entire build thread here to find out everything completed. Below is a link to the...

Just wanting some pics of nbs trucks with 3" Body lifts, trying to decide between that and a 1.5". Thanks in advance. Also, I see alot of guys in here with the spikes on the cross member bolts on their lifts, where the hell can I snag some? Or better yet what could I search on eBay, I can't...

Wifes Tahoe My silverado

Hey guys quick question. My wife loves they way tahoes look lifted with 22 x12s and 22x14s. Her tahoe is a 2007 2wd. I recently purchased some 22 x14 Mayhem missiles with 35 toyo open countrys. My question is what lift should I go with and why? I'm looking for something that will give us...