Being new to ls engines, everyone has to start somewhere, so I set a rather low goal of around 350hp. Right now I am sitting bone stock as far as engine and trans goes. Is my goal reachable without going to far into the engine? What are my options? My pockets aren't deep enough nor is my spare...
so i strolled across this on my local reck neck fb group.
and was kind of intrigued i think the bumper almost looks better on the nbs then the 2014+ models.
thoughts?
Soo traded in the 1500 for a 2500hd. So figured id make a new thread. Gonna be a slow project. im personally not a huge fan of the stack so i think exhaust will be first big thing. I need to do my ac controller and steering wheel with leds. As well as eveything else interior led. How hard...
I've got a 02 sierra extcab lowered 3/6 with Mcgaughy springs and flipkit, also has the 2 piece driveshaft. Let me start off sayn the carrier bearing has been raised 1/2 inch and it already has 6* shims in the rear BUT it still vibrates from 10mph up till 30-40mph depending how hard I...
The pics are pretty good IMO for using an iphone (6). The wheels need polishing BAD but from a distance they look pretty good. updated specs on the truck are 6.5" zone with a smaller 4.5" block. 20x10 shields and 295/55 toyo at2's and I measure at 44.5" front and 43" rear. I hope to get the...
Haven't been very active on here & I've been needing to make a build thread so to start it off... I Received this truck at the beginning of my sophomore year. Nothing special to a lot of people but for me, as ugly as it was I thought it was pretty cool truck with a lot of potential. I got it...
So I'm going to be in the market for another nbs truck here soon, with a budget of about $7500 max. Looking at 99-07 4.8/5.3 trucks but preferably an 03-07. I'm partial to single cabs as far as looks and performance goes, but I've been told I'll hate it after driving a crew cab for so long. Any...
99-02 chevy
car
chevy
college
crew cab
dic
duramax
ecsb
friends
how to
injectors
interior
lbz
lifted
nbs
replace
sierra
silverado
steering
steering wheel
stock
transmission
truck
wheel
word
Well guys, some of you have seen on Betty's page that I picked up another sierra as a daily. I was not planning on this one as part of my pay cut due to oilfield prices was losing our company trucks, but I picked up this 2015 Sierra.
The plans:
3.5" lift (yes it is 2wd but I do not plan to...
Hello! My name is shawn , I'm from the southern part of va. Recently got married to my beautiful wife in august and had my first son on 1/23/2015 8 lbs and 1 oz, 3 weeks early but healthy as a ox!
My first vehicle ever was a 1993 GMC sierra got it when I was 14 it was totaled when I got it...
This is the build thread of my truck this is when it was completely stock Then detrimmed/detrimmed her and put a billet grille in wasn't high enough so put on a 6-7.5 superlift kit with the dual shocks and she got a fresh detail also got some cheap ebay lights that tarnished away...
I will most likely be removing my lowering kit and 24" replica wheels in about a month due to wanting to go back to a lifted truck. Love the look of the lowered ride but it's just not practical down here in south Louisiana especially at the hunting camp. I've only had this kit installed for a...
I'm pretty sure we've never really discussed this in depth. But I'm putting on my Zone 1.5" body lift on my NBS this weekend and was just looking for some tips and tricks from those that have done it.
My main concern is how you handle the front clip/core support. My thinking is, remove all...
i have been tossing around the idea of getting rid of my 05 ecsb for either an 11 or 12 ccsb. now really sure which one to go with. i have a budget of around $25k. which most of them are right around there locally with anywhere from 40-60k miles
is there much difference in the 2
does the...
My buddy has a lifted 2wd.
About 6.5"-9" lift and he has air shocks in the rear. 33x12.50 with 20x12s.
He is wanting to bag the rear also, where he can adjust while towing or just driving.
From level, to bulldogged, etc.
He already has a compressor for his train horns.
Would it be easier to...
Post up some photos of your (or someone elses) custom diecast/model builds. Any scale, any style!
Ill start with a couple of mine. Ive got lots to share if interested!
First off, sorry if i didn't post in the correct section. Wasn't sure where to post this.
My question is, has anyone ever made their truck a short bed? What i'm talking about is the option that came out in the 05/06 ext cabs. I know the bed measures 5.8 feet, and its basically the bed off of...
I have a 04 chevy 4wheel drive, Z71. I decided to lower it. I got it custom painted. turning into an SS truck all I need now is rear tailgate cap, rear bumper cover, and the cladding. It has a volant air intake system with the scoop system running to the right front bumper hole. A polished...
Before talking about the Sierra, I did sell the 03 Silverado 2 months ago. After 7 years of ownership, rust taking over, plus having an offer I couldn't turn down, it was time to sell.
And....
A week or so later I found this one on craigslist. Went and looked at it, turned out to be...
This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
By continuing to use this site, you are consenting to our use of cookies.