led

Before talking about the Sierra, I did sell the 03 Silverado 2 months ago. After 7 years of ownership, rust taking over, plus having an offer I couldn't turn down, it was time to sell. And.... A week or so later I found this one on craigslist. Went and looked at it, turned out to be...

So I installed led bulbs in all of my front turn signals along with a resistor for each bulb. For some reason my drl aren't coming on all of the time when the auto-lights are on and I'm still getting hyperflash when they aren't on. If I switch the lights to any other mode, the drl co.e on and...

Been looking at doing an HID retro in my 2005 silvy. Bi-xenon Morimoto Mini Stage III Kit (H1) This is the kit I want to install. I'm only planning (at this point) to do the M1 in the high beam location. Its much deeper and should require less cutting. This is the write up I am going...

Start out with some info its a 2003 GMC 1500, i have VLED switch backs in the front, the flasher relay changed to prevent hyperflash, and silvy tails. and LED's in the reverse lights, not that it effects this. i want to put LED brake light and blinker bulbs. i got the dual stage LEDs...

Okay someone help me out here, ordered some 2357 switchback leds for the front turn signals, my truck is a 95 and someone told me what flasher to buy which was a 4 prong flasher when mine is a 3 prong. Now my problem is is there is no metal contact where the flasher plugs into the truck for that...

On my 06 silverado i had the windows tinted and had a brow across the top and bottom of the front windshield. Now my headlights come on all the time and add you can imagine is annoying having to turn off headlights every time u get in. Is there any way to modify the sensor so that its more...

Hey new to here. i have a 2006 silverado 1500 crew cab with 5.3 current mods are leveling kit, boondock bumper, led tails and 3rd brake light, smoked headlights, kenwood double-din touch screen, jl 8inch sub (for now), 20% tint, Airaid JR cai with airaid filter, jet mass air flow sensor...

set this up for a friend last night. A total of 8 2" pieces of "strip Led's. 5 evenly spaced across lid and 3 on the inside of the box nearest to the tailgate. Will be finished up with a hood pin switch so they turn on when lid is opened. That is a Massive power inverter on a fused...

Looking for a good set of NBS Taillights from a GMC Sierra (think some may have come on early Silverado too...) with the Black Border Outline. The tails that have the red/amber/clear sections. I have some good condition OEM GMC taillights with the red border if interested in trading. Also...

ok so i did a DRL delete like the youtube video posted and now this is happening just wondering what i causing it and how do i fix it ?

Northwest 4x4 "Prerunner" Build ]Figured I might as well put up a build thread. First page will be a pic explosion of the last few years. Most of it will be copied from an old thread but hopefully there will be some info that people can take from it. Specs: Dixon Bros 4x4...

...with the LEDs in the headlight. I'm looking to pull the trigger on a morimoto hid kit, 4300k 35w, for the headlights, and 4300k LEDs for the fogs. Will the morimoto kit match the LED brows in the headlights? Or at least close? I do not want 5000k as they all look blue to me. Anyone done this...

Well decided it was time to pick up a another truck. Ended up getting a black 2007.5 6.0 vortec max crew silverado ltz. Mods so Far: 2011 ltz split grille air aid mit intake tube K&N drop in Filter Cleared headlights LED turn signals 2.5 tgc level Antenna relocated billet bowtie...

Have been on the lookout for a new (another) project for the last 5 months or so. I wanted something different from the bagged '01 this time. I feel like I cant take it anywhere, get afraid to leave in in a parking lot, drive it on non-paved roads, take it to the river/tailgating/etc after all...

Well, since I rarely drive my truck, it does from time to time, and I got tired of it, currently it is in a borrowed trickle charger. I have to run a cord out to the truck so I want something to sit under the hood safely. Someone suggested a solar-powered unit. Opinions? What are you using...

My 2500hd Build up so far. - Chevy Truck Forum | GMC Truck Forum - GmFullsize.com just to get you guys caught up to now, you know how everyone looks back at their yearbook pictures and are just like ahh what the hell, so please spare me the grief about all the nonsense with my truck in the...

Been running some ebay led bulbs for the my reverse lights for a while. Found some really nice bulbs at Autzone for 35.00 for the pair. But couldnt find any info on them. But a guy on ebay had some used ones for 20 bucks. He didnt like how white they were but wanted them to be more blue. O.o...

So I recently had to replace a socket ( I broke the inner base while pulling out an led, I replaced it with just an $8 socket from O'Reillys, my parking lights have not worked since the day I replaced it. Well in in the process of doing the drl delete mod just figured I'd address this issue I...

Got this truck back in July. Gonna post progress pics in here. Here is how I got it. 02 LB7, ECSB, 4x4, LS, 138k, mostly stock, ugly af Dem rims tho De-molded, removed toolbox Cut off fgt tip, de-badged, esky tailgate which is now gone Swapped front end off my gasser Cleaned it up a...

I always told myself if I ever bought a 3/4 ton diesel it would need to be 4wd, just because lol. Well I found my truck(06 CCSB LBZ) that was 2wd, low miles and really clean and I couldnt pass up the deal. So I settled for 2wd. I recently found a guy selling a totalled LLY. He cut the frame off...