Guy has two almost new 37x13.50x20 mud grapplers, he says they rubbed on a tie rod on his jeep and he took them off and went to smaller size blah blah blah.. anyway they're gouged. I'm guessing HE did the "vulcanizing" or w/e not that it will actually fix anything.. not sure why the fuck he did...
Guess since the other thread disappeared I'll start another. POST them pics of cars slammed, stanced, or just BAMF........
I'll start with the following......
2007
auto
bags
black
build
cam
cars
dl3
friends
funny
gmc
interior
jeep
jimmy
kelderman
led
mirrors
nbs
nnbs
paint
post
review
servo
shocks
sierra
stars
stock
truck
video
wheels
wtf
Copied from my build thread on another forum.
Heres my 1993 RCSB daily driver/project.
some pictures of how it started out when my buddy had it.
Then to this is how it looked when I got it.
Need a new condenser looks like.
Yes my bumper...
Looking for a Chevy Dana 60 front axle, passenger's side drop at roughly this angle:
The larger and higher resolution the better. Any help is greatly appreciated.
Did some wheeling this weekend in Wellsville Ohio, pretty much in the middle of nowhere near the pennsylvania border
we drove down and met up with a bunch of guys from the Ohio TTORA chapter, had a blast with them
we took tons of pics, so I'm gonna post a ton of them, some good shots of...
Suspension:
6" pro-comp
leveling keys
1.5" Zone BL
5" lift blocks and 1" add-a-leafs
20x10 BMF S.O.T.A.'s Death Metal Black
35/12.50/20 Toyo MT
Fox 2.0 resi. Shocks Front
Bilstein 5150’s rear
MOOG Pitman and Idler arms
Cognito Idler & Pitman brace
SuperSteer Idler Arm support
FFR...
Just as the title states. what is the best deal out there right now for around $100 for from 6.5" speakers? Off a aftermarket headunit, no amp. I can get some Polk audio DB6501 for $80 on Ebay..what else would you recommend? Its for my buddies jeep cherokee. thanks a bunch
test drove this today, 04 2500HD, 6.0, 80e:
here's the link:
http://www.sunshinetoyota.com/2004-GMC-Sierra-2500HD-SLE-Battle-Creek-MI/vd/9505424
I drove it tonight, drives great, got a little cold start clatter from the passenger side top end that goes away when it warms up, but it...
I'm sure there's a few out there that are into two wheeled motorsports. Lets see what you've got!
My Custom Softail - 02 Daytec frame, S&S Super 100ci, 6 speed trans, Billet wheels, and all dat harley chrome
Rice- Yamaha R6, Sprayin N0S, Power Commander, Devil twin pipes, full...
I dunno how much performance is discussed here but i wanted to put out a shop name and local for dfw ppl on cylinder heads znd custom cams! Chris the owner was a S.A.M. instructor and now here in south of fort worth offering his best cylinder head porting and xustom grind cams. Je makes 600 plus...
I have a few left over from my 04. These are a common problem and cause the tail lights to burn out. I have like 4-5 of them. Cover the shipping and they are yours.
I'm having a winch bumper built for my WJ. Here's a couple pics of before, and the progress. I should be picking it back up Friday to take it to have it powdercoated.
2003 Silverado 1500, all original, ECSB, 5.3, z71, Bose, leather, etc.. 241,400 miles on 12/24/11. Just rolled 248k @ 7/3/12. sitting at 254k 9/9/12 256k 10/22/12 About to roll 260k on 12/19/12, so ive put about 20k on it this year. I've replaced Idler/Pitman arms, A/C clutch, Gauge cluster...
I had a request to repost this here, so here it goes. And before anyone says it, yes I know you can just get the 06 valence and be done with it, but I did this for less than $10 and it took me only a few hours. I also did this in 05 for the first time on my stock valence, so 06 valences weren't...
I had a request to repost this here, so here it goes. And before anyone says it, yes I know you can just get the 06 valence and be done with it, but I did this for less than $10 and it took me only a few hours. I also did this in 05 for the first time on my stock valence, so 06 valences weren't...
This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
By continuing to use this site, you are consenting to our use of cookies.