Brand new OEM 90MM Throttle body, Gold blade, drive by wire. P/N - 12605109 - SOLD
Brand new X-Link 3.0 - SOLD
Brand new Yank pro truck series multi disk converter 3200 stall, for 4l80e - $1000
TBSS Intake with fuel rail and injectors. Had 10K miles on it all when removed - $250
Call/Text...
I have a complete P1SC kit minus injectors. Head unit, piping, intercooler, bypass, and 2 pullies. The head unit just had bearings and seals replaced. ABSOLUTELY no shaft play and feels as tight as a new unit. I am wanting to get $2500 for the kit and you pay for paypal fees. I would consider...
post up stuff you have, good or bad...please format like below
Reciprocating Saw
Reciprocating Saw w/ Rotating Handle
Have, works awesome.
Roller Seat
Pneumatic Adjustable Rolling Stool Seat
2 casters are fucked but still works...probably jacked up casters cuz my fault
Transfer Pump...
Tools Needed:
10MM socket
8MM socket
Small flat head (I used one for adjusting sprinklers)
Petroleum Jelly ( I used unscented, didn't want my truck smelling like a used buttplug going down the road)
First remove the plastic engine cover.
Then remove the two 8MM bolts holding the...
Truck is
2003 gmc sierra rcsb.
I have 4.8 with built trans.
Efans and 34" rad waiting to go in and will be doing headers also.
I dont really know a whole lot about cams/stalls. Thought ill do it when i do fans and headers.
Suggestions?
I figured I would post this again, since we took some of the goodies off:
2003 Arrival Blue SS
Factory 6 disc stereo
No XM, No Onstar
89,126.7 miles as of 1/31/13. It is a 3rd vehicle and will not be driven much
Modifications:
Reflexxion steel cowl hood
Weld 20x8 Cheyenne wheels...
After reading D1NMANS thread, I decided if I’m going to keep my current truck, I’d better get a plan in place for when shit starts breaking. That way I’m not debating over engine/trans/rearend swaps while the truck sits and don’t end up leaving power on the table due to hasty decisions.
The...
This started a little while ago. The issue starts when I'm going down the hwy at about 65-70 and about 2000 rpm. When I punch it the truck starts to bog down, like it's not getting enough fuel. Eventually it gets worse to the point the truck dies. Sometimes the truck will start but when I press...
Hopefully if i do this right a mod will sticky it for other members to use. I'm currently in the process of swapping my L59 (flex fuel 5.3) to an LQ4 6.0. So far, I've gotten the whole wiring harness disconnected and intake manifold removed. Plan to use the intake manifold and throttle body from...
Ok so my truck has lost all compression on cylinder 7 so I'm looking to swap in the 5.3 HO. I'm thinking that it should be a direct swap obviously, but my question is do I have to use my L59 injectors due to the flex fuel shit or what? Also, will I need to tune it? Not a big deal cause I have...
Well ive been sitting on this LQ4 a while,actually sold it to a buddy them decided to buy it back after going to Jackson for PT.Net meet
So 82xxx LQ4/80e trans picked up,sold the trans,since mine is build with gobs of warranty,and the guy is good who build it and he says it will hold so we will...
Hello, i want to get rid of the drum brakes on the back of my NBS crew cab, and swap in some disc brakes.
What some some of the more common conversions for this application? Any suggesgions?
Taylor
Some of you already know of it and may already be on the page...But i started a FB page called Because Race Truck. It's going pretty strong with 4000+ likes and i'm pretty excited about the growth.
I still consider CGM my "home" site...and would be proud to throw out CGM and CGM members love...
Truck is running wierd as soon as I hit 55mph it sputters or hesitates not a big deal but I was just curious what all should I look at replacing as far as maintenance goes? 02 4.3 135,000 miles. Already replaced fuel pump, intake manifold gasket, fuel filter, pcv valves. spark plugs and spark...
LOCATION: STATESBORO GA
2004 audi a4 quattro 1.8L turbo. black leather, heated power seats, auto windows, power locks, 6spd manual 126k miles.
mods
Suspension: lowered on koni coilovers
Exterior:R8 repliaca 18" wheels on almost new 235 40 18 tires, Ultrasport lower front bumper.
interior...
Seafoamed my truck this past weekend through break booster hose. Drove 150 miles to atlanta after. Got to apartment, went to leave and cranked truck up and it has a rough idle, flashin ses light, and seems the be miss firing at all rpms. I disconnected battery, no help.
Will get codes read...
This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
By continuing to use this site, you are consenting to our use of cookies.