flush

Okay I will try to explain the issues I have been having for about 6 months now. I have a '02 1500 with original size calipers and rotors in front, and nbs suv rear calipers and rotors in the rear, lml hydroboost swap, new hb unit and new gm power steering pump and am still having the issue...

Hey everyone, I have a set of wheels picked out but I am not sure if they will work. I have a 2009 Silverado with a 2/4 drop. The wheels I would like to get come in either 18mm or 00mm offset and I am not sure which would be better or if they will work at all. I would like to run a 275/55r20...

Sup guys, so I am new to the 4x4 world, only been a lowered truck guy before now. So I have a 16 4x4, and plans so far are just a level and bigger tires and spacers possibly on the factory 20s. I was going to go with the top gun 2.5, but for tires should I rock a 33 or 35? Also, if I wanted the...

Heres my situation, lost 2/4/reverse in my trans several weeks ago. Fianlly got the stupid thing out after following a how to over on pt.net. Now is there a how to for installing? I had to buy new torque converter to flywheel bolts due to mine having a allen head center only. Do those bolts have...

So last week I had the bright idea of installing a QI wireless smartphone charger in the center console lid of my truck. I have the 40/20/40 split seats with the jump seat. This install is slightly different for trucks with a full console. I'll make note of that in my write up, as the how-to I...

Does anyone have a pic of the location of an IAC valve on a 2000 4.3L S10? My cold idle is around 1000 and I would think it's either a vacuum leak or an IAC valve. I know it's supposed to be on the throttle body but just asking. I had an engine flush recently and a thermostat replaced as well...

Hey everyone I am not new to forums, or even nee to automobiles. Iv grown up and spent a lot of my time (and money) on cars. My grandfather used to drag race, and owned a machine shop. My father has been a mehanic his whole life as well. Its in my blood, its a passion of mine I hope to one day...

So I'm gathering parts to bag the crew cab. Will be on a 275 30 24. Trying to get ideas for tubs. Things are going to be tight under the hood as I'm looking to run a York 210. Really liking the tandem axle tubs that go flat against the firewall. Anyways post pics of what you got.

so as some of you might know i bought a second truck just cause it was a good deal. it is a 2007 classic silverado with only 177k km's, that is 110k miles. it has a fully loaded limited edition gfx package i think its pretty cool and also limited to Canada. plans for the near future...

Like the title says, looking for suggestions. Cat back, S/I S/O, going to dump it right over the axle. Don't really want a redneck rasp, but a little drone is OK. Iirc factory piping is 2.5"

It's that time of year and I was wanting opinions on antifreezes that claim to mix with any make, model or color of coolant. Both my vehicles require Dex Cool which some don't like. I also read about some being concerned about coolant PH levels but when you ask auto parts stores about...

Picked this up a couple weekends ago. Its a 99 with the newer front end, and 05+ Silverado tail lights. Bagged with a 2 link/watts link in the rear, and factory arms in the front. I think the uppers are flipped, with just upper and lower cups. Its got an EDC that I'm still learning about...

You read that right, a free NBS denali light. This is the passenger side only. Its not in the best of shape. the lens is started to fade to yellow and cloudy, the projector bracket doesnt sit flush from when i removed it from another headlamp and the mount bracket is MIA. I figured I'd toss it...

Some Tahoes, Suburbans, and Yukons did not come equipped with a factory third row seat. I just so happen to own a 2007 Z71 Tahoe that fits this description. While I rarely ever have the need to use a third row, it does come in handy when company is in town. so I did some researching on the old...

Here is my How to on retrofitting the factory Denalis. My write up is a little different as i was re-retrofitting, so removing the projector from the housing is similar but a little different. the parts you will need are (2) Aftermarket Morimoto 6.0 Projectors (8) 8-32 bolts that...

I have a 2005 silverado, ext cab, reg bed, leveled, spiral grey metallic I'm thinking of going with a set of 20x9 polished tbss replica wheels. I just had a couple of questions: What is a reputable website to order them from? Can I order them with the correct bolt pattern for my...

Im going to flush my trans and figured while im at it would swap to the shallow pan, but the only thing i can find is filter for shallow pan. so any help with AC-Delco P/N would be appreciated. BILLY!!!!

Currently -2. My 99 nbs starts fine but my tranny hates it. 100% fine when warmed up or not fucking sub zero out.. likes to shift like its in tow/haul. I assume my tranny fluid is thick from the cold weather. 168k and tranny flush and filter 10k ago. Any additives I can use to help it out...

Just a quick teaser... :lol: more to follow once cleaned and installed. I have to get new o rings for the center cap Centerline tomahawk series sniper. 20x8.5 with a 285/50 toyo proxes st Instagram

Pair of DL3s removed for tow mirrors. Power folding, heated, signal, black caps Asking $150 shipped obo Located in Amarillo Texas. Will ship.