For the past year my brother's truck (06 ccsb) has had a weird HID problem. For some reason the passenger side HID doesn't always want to fire. I've tried changing the bulbs and the ballasts. I've ran the HIDs on both the stock headlight harness as well as a relay kit. Anyone have an idea of...
So.... Many of you know my old truck. Cfloyd and I traded a while back. Anyway... I'll pic dump to get you up to speed.
Here's how I got it
Escalade handles
Raised bumper, color matched emblem
Denali lights
Interior Escalade handles
EDC, hydroboost
Air gauge
Front bagged...
Good Afternoon.
Couple days ago my mom complained to me of a burning smell under her hood. I've never once cleaned this motor in the time she has had it...mom is more of a robo-wash kinda lady. Therefore up until this point, anything more than using that sucker as a test mule for the...
Alrighty so after about a month and a half of owning my rcsb and talking to a few guys on instagram I decided to sign up and create an account. This is my first build thread so forgive me if I do anything wrong, or seem really disorganized.
So here's what it is,
2004 Chevy Silverado RCSB 5.3l v8...
What kind of money would I realistically be looking at to put a mild cammed LQ9 or LQ4 in my truck? I will need to purchase a good running low mile engine and then the parts for the cam swap, some long tubes, and I'm sure a few other parts. Can I realistically do this for around $3500 or less...
For those of you that know me, i sold my Green 2002 RCSB and just picked up a 2014 RCSB. plan on doing a build very similar to the 2002 i had.
Here is a pic of how it sets now. Looking to do a coilover setup all the way around with a narrowed rear end and 24" Intros
Already de-badged...
Well, it seems the DoD lifter plague hit my car Friday night while in San Antonio, I was able to get the car back home safely yesterday. I'm not positive, but it's most likely a failing lifter. Once I have some free time I will figure it all. Noise seems to be coming from the valve cover area...
auto
baton rouge
beef
black
build
cam
camaro
engine
facebook
heads
how-to
lift
monster
mpg
noise
post
stock
swap
system
truck
tune
upgrade
vette
video
wheels
I have a 1997 GMC K2500 Suburban with an L29 454 4WD. I am currently doing an engine build. I will be running a Competitions Cams camshaft with 0.54" intake and exhaust lift (with 1.8:1 rockers), 206 degrees intake duration at 0.050" lift, 212 degrees exhaust duration at 0.050" lift. I hope to...
Finally got home and getting the pics uploaded. I took around 500 so it took a while lol. We stayed at the Riviera down near the convention center, didn't get to see a whole lot of Vegas between working the show and networking afterwards but one night me and one of the other guys walked the...
I have some leftover parts from my 6" Rough Country lift.
I have the non-torsion drop brackets, brand new, with the spacers & bolts. Should fit any 4-6" lift
$50
the CV spacers(hard plastic)
$20 for pair
brand new front shocks with the mounting hardware. RCX 2.0's
$50
also have the stock...
Will post pics when I get off at 9pm..
I own a 2007 gmc classic crew cab sierra dark ming blue.
body and interior is about a 8 out of 10 mods listed below.
current engine is non flex fuel 5.3 roughly 153k
4l60e vette servo stock stall
stock manifolds going into a 18 in magnaflow dual...
This morning when I cranked my truck up and it got down to a idle it just coughed and died and its been doing it all day so I figured it was just the fuel filter. I went to go get one and the guy told me my truck doesn't have one that it's in the pump itself which is $424 so I crawled under the...
I just want you guys opinions on these 2 products before I hit the buy buton please
Performance Parts - 1999-2006 GM Truck & SUV - Engine - Pulleys - Tick Performance, Inc.
Texas Speed & Performance 1-3/4" Stainless Steel 1999-2007 Truck Headers
Well decided it was time to pick up a another truck. Ended up getting a black 2007.5 6.0 vortec max crew silverado ltz.
Mods so Far:
2011 ltz split grille
air aid mit intake tube
K&N drop in Filter
Cleared headlights
LED turn signals
2.5 tgc level
Antenna relocated
billet bowtie...
Whats up guys? I got a question, got a buddy whos going to be doing a engine swap and wants to basically know what muffler would be best. right now hes considering the Corsa db 4", or a Magnaflow 4". so question has anybody on here used the corsa db 4" and if so howd you like it? also what other...
I have a 2005 Crew cab and it currently has a gansta drop ( cut springs, shackles and center leaf removed ) that sits about 2/4ish. I want to add the the leaf back and possibly get a flip kit. I want to use a mcgaughys or belltech kit but they only offer a 4" or 6" drop with their flip kits...
Im running low on detailing supplies and need to restock:
Truck soap
Detail Spray
Microfibers (for paint and for wheel polishing)
Trim and wheel cleaner (like VRT)
Applicator for Trim and wheel cleaner
New single stage liquid wax.
link me the new hot shit, fellas
This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
By continuing to use this site, you are consenting to our use of cookies.