most of you guys know my truck by now, but wanted to start a build thread here since i don't like gmfs at all anymore. lol
just a few details
2007 classic
at 143k
5.3 auto 4x4
basic ecsb truck
nothing fancy
leveled with horrible angles, 3" block
cai, cheap single chamber muffler...
I had put a Belltech 2" procoil in my wifes z85 crewcab Colorado (2wd) awhile back and never got the full 2" drop out of it. Was looking at Belltechs drop strut(25005) just to bring it down a little more, they say you can get 1" out of them and that's all I'd be after. Would they work with...
First off, sorry if i didn't post in the correct section. Wasn't sure where to post this.
My question is, has anyone ever made their truck a short bed? What i'm talking about is the option that came out in the 05/06 ext cabs. I know the bed measures 5.8 feet, and its basically the bed off of...
So I lowered my truck, 06 Sierra ECSB with a flip kit (DJM) and 3in DJM LCA's.
The driver side of the truck is leaning more than the passenger side. It's leaning a good inch to 2in more.
I don't have any idea what to check. So pleade someone help me ASAP.
Thanks in advance
So picked this gem up yesterday from bakersfield.
Plans are to bring it back to life and change the paint immediately. Fix some of the fuck ups and resale it probably
Hi,
New'ish to the site. I have a 2006 Sierra ECSB (4dr) with the following mods:
Comp LSR 265 cam
CircleD 3200
4.11's
Vette Servo
Airraid MIT
HP Tuners (currently run 30-degrees of timing with 0 knock, off-idle :P )
I'm currently working on a 4-6 drop. I have new DJM uppers/lowers...
Just as the title, just wanting some pics of 15 x14s on nbs trucks, I have a 99 nba 2wd, with a 7" TCS lift plan on going a bit higher. I'd like 16.5x14 but they are impossible to find around here. Also wouldn't mind seeing some x12s. Also, specs please, spacers, how'd you fit em? Thanks in advance
Maybe you guys can give me an idea of what's best to run between the spacer and lift spindle.. my truck is a 97 c1500 ecsb . Now I know both will stiffen up the ride and I'm fine with that, what I don't want is to find out after that I should have used the coil vs the spacer or vice versa.. one...
Well boys, I'm sure some of you remember me here. For those who don't or are new, I used to browse/troll these forums on the reg, but haven't posted in about a year.
I drive a 2011 ECSB Silverado with a factory 6.2, cam/headers/bolt ons all that good stuff. After rebuilding the factory 6L80E...
Well here's the new project. 2004 Silverado RCSB that was previously bagged and tubbed for 24s by the choppin block in 2007.
- - - - - - - - - -auto merged double post- - - - - - - - - -
First thing to go was the stock cloth and center jump seats. I replaced them with the katzkin leather...
2007
auto
bagged
black
build
change
cheeky
clear
console
ecsb
ginger
gmc
hood
how to
lift
lift kit
paint
post
red
silverado
stock
swap
tire
truck
victory red
Havent seen one of these threads on this site yet or found one so figured id start it since I could use another set of eyes for mine which will be starting soon,
Post up them pictures !
tech info would be sweet too
ill start it off by posting my favorite sas'd truck my brothers...
02 sierra ecsb flip kit NEED INPUT PLZ!!!!!
I've got a 02 sierra extcab jus lowered it using mcgaughy 2" drop springs and mcgaughy flip kit with 1.75 lit shackle. After installing the flip kit and lift shackle the rear end was almost touching the frame..... Needing a quick fix I installed a set...
First day I got it in October 2012
About 6 months months after I bought it. Everything was the same lol
Leveling keys installed and cranked about 3/4 of the way.
Shaved the tailgate
Got some black 17 inch wheels. It stayed at this stage for a while since I couldnt make up my mind up...
New here, this is my 2007 Silverado ECSB 2wd!
Day I got it 2 years ago
Cleared Heads
Leveled on 295/55/20 Trails
3" Spindles on, stock blocks, shocks weren't long enough
Bilsteins and 3" blocks
Towz
20x10 Preds
Got rid of those nasty tinted tails after i got pulled over
1500
2007
auto
black
change
chevy
clear
crystal
ecsb
headlight
how to
lift
nbs
nnbs
post
shocks
silverado
spindles
stock
sub
tails
tires
truck
wheel
z71
hello all, i have recently bought some 20" denali rims for my truck, i was thinking of just running the stock 265/70/20's on my truck but i might be able to sell those for decent money since they only have 2000 miles on them.
So i am looking for a good price on a 305/50/20 cooper Zeon LTZ...
Hey guys, been a long time since i've been on here since I usually lurk over at gmfs but huck has been trying to get me to come post over here and look what I'm doin.
Anyway on with the truck. I sold my 2 door tahoe w173 on it for 7k and that opened up my options on a new truck. After...
So,
I have tried 2x now to do a drop on my truck. It's a 2006 ECSB Sierra, 2wd.
For the life of me, I am having the hardest time with the front. I can't seem to get the coil springs out or to a point to where I can get them out.
When I break the lower balljoint loose and lower the jack...
This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
By continuing to use this site, you are consenting to our use of cookies.