Been looking at doing an HID retro in my 2005 silvy.
Bi-xenon Morimoto Mini Stage III Kit (H1)
This is the kit I want to install. I'm only planning (at this point) to do the M1 in the high beam location. Its much deeper and should require less cutting.
This is the write up I am going...
Hi all, new guy on here. I found this forum on tapatalk. I see lots of off road guys. Am I in the right place?
My ride is a 1995 s10 blazer 4dr 2wd.
355 SBC,T350, 4.10's, full belltech suspension, line locks, and 2dr fuel tank to be able to accommodate custom side exhausts boxed through the...
Finally got home and getting the pics uploaded. I took around 500 so it took a while lol. We stayed at the Riviera down near the convention center, didn't get to see a whole lot of Vegas between working the show and networking afterwards but one night me and one of the other guys walked the...
Well, picked this up today. 2013 GMC Sierra 2500hd SLT, black leather interior, nav with backup cam and convenience pkg as well as a spray in bed liner. Truck only has 9k on the clock, practically brand new.
Keeping the plans for this simple:
Not Bought:
Cognito 4-6 front lift
Kelderman...
Will post pics when I get off at 9pm..
I own a 2007 gmc classic crew cab sierra dark ming blue.
body and interior is about a 8 out of 10 mods listed below.
current engine is non flex fuel 5.3 roughly 153k
4l60e vette servo stock stall
stock manifolds going into a 18 in magnaflow dual...
This morning when I cranked my truck up and it got down to a idle it just coughed and died and its been doing it all day so I figured it was just the fuel filter. I went to go get one and the guy told me my truck doesn't have one that it's in the pump itself which is $424 so I crawled under the...
Have been on the lookout for a new (another) project for the last 5 months or so. I wanted something different from the bagged '01 this time. I feel like I cant take it anywhere, get afraid to leave in in a parking lot, drive it on non-paved roads, take it to the river/tailgating/etc after all...
Let's see all of your grilles!
*bumper grilles
*custom grilles
*billet grilles
*mesh grilles
*all grilles
Post what kind of grille it is! Let's see em all!
Picked up a clean 2006 duramax cc over the weekend and as requested here is my build thread. This build will be pretty slow for the most part but will mod as i can. My plan is to do a clean leveled look since thats what setup i always return to (like my nnbs lol). The truck is self is pretty...
So the obs is lowered. Supposed to be 4/7 but ended up with 3" up front (due to baby motor) so lifted the back up an inch. Currently 3/6.
DJM 2" spindles
DJM 2" springs
DJM Flip Kit
DJM Calmax shocks
I know I altered the suspension so I know it's supposed to ride different. That's not my...
Soooo I've been riding for too long without beats. Rode with a buddy the other day and caught the bass bug again.
Truck is a regular cab with a bench seat.
What are my best options? I could fit 2 of the Kicker truck boxes with the 10s already mounted. Put one on each side and amp rack in the...
I have a 2007 tahoe and just purchased 2 12 L7s. I wanted to see if any of you have put 2 12s or just 1 behind your 3rd row seat?
I would like to use both but even 1 im fine with.
My problem is I need 1 of my 3rd row seats. The other one I have folded up for baby stroller.
Any help...
so anyone looking for mid travel we have a few kits laying around for 2000-2010 2500s. it consists of uca's,lcas,spindles,shock towers, axles with lifetime warranty,bypass shocks,coilovers with springs and heavy duty steering. retail is 9300 but i can get you hooked up since this forum. we were...
Hi everyone, I'm new to this forum. This isn't my first forum to be a part of. I have a 2006 Chevy Colorado and a 2003 Yukon. Both have a little work done to them with a never ending list of "to-do's." I live in Philadelphia, PA. I'm gonna try to throw 2 pics up.
call me old fashioned but Im not big on the new craze with the big trucks, I prefer mini truckin. I have a 1995 Chevy S10 reg cab short box, im putting in a small block(305 for now). i would also like to use a corvette transaxle in the rear fro weight and space up front. just curious if anyone...
Well, finding a tuner can be a bitch sometimes, and while I like my BBP on my stock truck, I want to be able to have really good results on my cammed car right away, little to no down time! The two really good LS tuners in Dallas are A. expensive and B. hard to get ahold of. I'm afraid to do the...
Even though the majority of the build is done, I need a place to consolidate the pictures and what not..
The truck was involved in a wreck back at the end of March, and it sat like that for about a month. Finally got the check from my insurance company so I ordered everything I needed to...
its time for me to be a better member to CGM, so here i go.
my names jake, and i have two trucks 2003 rcsb gmc sierra, i have owned since 2009 and the other truck is a 2006 chevy silverado. i like shitty beer.
2003 Sierra
Suspenion:
-lowered static 4/7
-monroe shocks
-energy suspension...
On a whim I purchased a 1972 Custom 350 C10 while on my way back through Vermont yesterday.
I've always been a fan of the second generation trucks and stopped in to look at this shop truck.
She's seen better days cosmetically with it's fender well rot, cracking bondo on the bed and a door that...
20x10
black
build
cheeky
chevy
color matched
colors
custom
engine
funny
lbz
lift
long bed
lowered
noise
paint
post
ride
sierra
steering
stock
tire
tires
truck
wheels
Okay, so I'm looking at replacing my headlights and I really like the look of halo type lights. Now, before I go any further, I know there are better options like oracles and such, but I'm about to head off to college and do not have allot of spare money, so I flat out cannot afford the custom...
This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
By continuing to use this site, you are consenting to our use of cookies.