Thinking about letting my LB7 go. Lots of mods and upgrades. Priced at $16,500 OBO. Currently has 193,xxx miles. I don't have to sell it right at this moment, but if someone is serious and wants it bad enough I'll let it go.
Motor:
-S475 over stock compound kit built by MAXX Performance. Turbo...
What's up fellas, long time no see, been busy with the baby and job hunting. In the process I've sold the G8 and picked up this LB7, gave the wife the '14
So far it came with an Edge Juice w/Attitude, cranked T-bars and some black wheels...barff...
Got alot of plans but interested in advise as...
So i bought two Sundown SD2-10s DVC 4ohm
They need a 4.75" mounting depth. Id like to go under the seat down fire.
I ordered a subthump, then realized shortly after their box is limited to a 6" diameter magnet the subs have a 7.25" OD magnet so I got a refund.
Question, do any of you...
I'm in the process of removing the pinstripe and molding from my 2013 Sierra. I know on the molding to use the eraser wheel, but what about the fine residue left from the pinstripe? Would a clay bar take care of it? Thanks
--Josh
I'm looking for a cheap set of lights if anyone has a set laying around. I want to retrofit mine in the next few months and would like a set in case I mess mine up. Thanks.
Plush to waffle weave, glass towels to wash pads, and even more recently polishing pads, microfiber has forever changed how shine freaks keep their cars looking great and how detailers correct, protect, and care for customers cars. The argument could be made that no single advancement in the...
Gave both trucks some much needed love today....
RCSB got a new windshield finally. Bad scratch and a crack. Nice to finally have a crystal clear view again! HD got some love.... Was dirty as hell from DDing it a few weeks ago while I was doing the brakes on the RCSB.
So on my Duramax I need to come up with a slight body lift for it. Either 1/4 or 3/8 of an inch to help clear my downpipe better. I was wondering while I did it would it be wise to go with all new body mounts...bushings...pads...whatever they're called. I got 191k on it right now and it sees a...
This is the build thread of my truck this is when it was completely stock Then detrimmed/detrimmed her and put a billet grille in wasn't high enough so put on a 6-7.5 superlift kit with the dual shocks and she got a fresh detail also got some cheap ebay lights that tarnished away...
My headlights definitely aren't as bad as some of the ones I've seen some of you do turn arounds on and wet sand. With that being said however, I noticed yesterday/last night after not washing or paying much attention in a few months that my lights are starting to get a slight haze at the very...
so i am part of a diesel group in BC and they keep posting shit about LED headlights.
these:
PlasmaGlow Igniters LED Headlight Bulbs - Best Price on PlasmaGlow LED Headlight Conversion Kit
are these comparable to HID's?
any of you run these?
any better kits out there?
the...
awesome
bucket
clear
fog
ginger
gmc
headlamp
headlight
hid
hood
led
month
nbs
nnbs
pictures
post
pricing
replace
sierra
silverado
stock
system
troll
truck
yolo
My buddy has a lifted 2wd.
About 6.5"-9" lift and he has air shocks in the rear. 33x12.50 with 20x12s.
He is wanting to bag the rear also, where he can adjust while towing or just driving.
From level, to bulldogged, etc.
He already has a compressor for his train horns.
Would it be easier to...
Ok I have a us speedo Daytona white face gauge overlay, I also want to paint the needles while I have them off, what's the best paint to use and best way to remove paint from the needle? I want to make the needles red and will I need a special paint?? Thanks the truck is a 2000 silverado by the way
Hai guise. This will be my build thread of my first truck. Picked up an 03 2500HD last week. LS, 6.bro, 80e, 4:10s, 4x4, 150k, etc.
Pics of it when I got it
Quickly took all the bs off and sold it. Colormatched some things, cleared the heads, esky handles, black valance, removed 4x4...
Alrighty so after about a month and a half of owning my rcsb and talking to a few guys on instagram I decided to sign up and create an account. This is my first build thread so forgive me if I do anything wrong, or seem really disorganized.
So here's what it is,
2004 Chevy Silverado RCSB 5.3l v8...
names rick, im from deep south texas. I'm new to this forum, can't believe i barely came across it, but no where near new to the truck scene. These are my current rides, i also have a 1973 chevy longbed that has been in my fam since day 1. Has a 350 bored 60 over 13;1 compression, camel hump...
What kind of money would I realistically be looking at to put a mild cammed LQ9 or LQ4 in my truck? I will need to purchase a good running low mile engine and then the parts for the cam swap, some long tubes, and I'm sure a few other parts. Can I realistically do this for around $3500 or less...
This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
By continuing to use this site, you are consenting to our use of cookies.