I picked up a 95 Sierra last month it's got 3" springs in front the guy said, not really sure if they are though. The back has something I'm not familiar with that lowers the front leaf spring mounts to drop them, says its 4" in back and I don't think so.. I would like to put spindles on the...
Had some old offroad led lights laying around so figured i wanted to try and put the leds in my stock fog light housing.
Let me know wat y'all think.
led lights I'm using
fresh paint and led mounted
lens sealed back on
- - - - - - - - - -auto merged double post- - - - - - - - -...
Bought new and looks brand new except for some small damage to leather on very bottom corner from shipping.
Not to noticeable when installed IMO. See photos carbon fiber is hydro dip with clear and professionally done. not real carbon.
Repairable at most auto upholstery shops or online...
What's up fellas. Those who follow me on IG know the diesel is gone and has been replaced with this. I had my reasons...
This one is a 03, 4.8 2wd arrival blue, 3:73s yada yada
Day I picked it up
Cleaned it up and swapped wheels from the 14 and got it tinted 10% sides 5% rear
Got the 4/6 on...
Looking for some that you might have laying around like your cleared OEM ones or something. Hit a deer and need a set but of course the ebay clear ones are MIA currently and vendors told me to check back in 2 months.
Thanks
Instead of posting tid bits here and there, I'll make a thread.
2015 Colorado LT ext cab
2wd
Day I brought it home
After tint, valence removal, and 2" AutoSprings leveling kit
And how she sits now after debadging
In the middle of fixing some issues.
Did get the hood flutter fixed. For...
Gauging interest, good advantage right now in the USD to CND exhange. Please see the details, Ask members that have seen it how good it was.
$1,000,000,000 obo
or somehwre close to 30
Engine
LQ9 6.0 Flat Top Pistons
Stock Bottom End
Texas Speed Torquer V3 231/234 111lsa
PRC Stage 2.5 243...
So my brother and I picked up a friend's truck that's been off the road for a while. It is a regular cab F-350 6.0 Diesel, cab and chassis truck that originally had a hoof trimming chute on it and then a flatbed. This truck has a 9' frame, so when my buddy bought it he wanted to put a longbed...
Here is my How to on retrofitting the factory Denalis.
My write up is a little different as i was re-retrofitting, so removing the projector from the housing is similar but a little different.
the parts you will need are
(2) Aftermarket Morimoto 6.0 Projectors
(8) 8-32 bolts that...
Bugs
Need I say more?
I hate bug & tar remover. I think I've used it twice.
What's the best method for removing them, without harming the finish? Honestly if there's a way to do it without stripping the wax off of the hood that'd be awesome too. I have to be selective of weather/time of...
DJM 3" drop lower control arms, they fit 99-07c Sierra/Silverado with torsion bar front suspension 2wd/4wd and 99-06 Tahoe/Yukon as well as suburban/Yukon XL. They were installed installed then I pulled them off because my wheels wouldn't clear the arms completely. I have some Monroe shocks that...
everyone has a build thread, mines not as intense as a lot of these other trucks but this is what I got:
day I picked it up
day 2 step removal
new handles
added spindle and block on 265s
added 3" lift coil
7"cst lift and 17s and 33s
added...
20's
2013
20s
amber
auto
awesome
bigmatt
black
build
cgm
cheeky
clear
cluster
girls
headlight
heads
leveled
lift
mirrors
post
red
sierra
spindle
stock
truck
My hood is in desperate need of a new paint job and while I was out obtaining prices to get it painted, one of the sales associates asked why not wrap it? So I started thinking about it and now I cant decide if I paint it or wrap it...
The truck is Olympic White with esky handles, complete...
I've got a 02 sierra extcab lowered 3/6 with Mcgaughy springs and flipkit, also has the 2 piece driveshaft. Let me start off sayn the carrier bearing has been raised 1/2 inch and it already has 6* shims in the rear BUT it still vibrates from 10mph up till 30-40mph depending how hard I...
Morn, did a 2015 ZL-1 a couple weeks back. Spent 20 hours on the polish side. It looked about 85% better when it was finished. I have never seen a dealership essentially murder a factory paint job like that ever in my life. There are some deep scratches and other things (dealer installed)...
Bought a few months ago (12/26/14). Tires and wheels both were new and have less then 500 miles on them. No damage, no rash, no bends, no punctures, no leaks
Put 22s back on and selling these. I had them on my 02 Silverado that is lowered 4/7 and recently 5/7 dropped.
Comes with chrome...
Traded my gfs corolla for this car because the guy needed something better for his wife ,
Mild cam, bored .030" over , under pulleys , efans, aem intake, edelbrock headers have a limited slip posi for the rear diff not installed yet ,
New camaro black steel take offs , hids , bolt on bag...
auto
awesome
bagged
black
cam
camaro
car
cleaning
clear
control
food
girls
injectors
offset
paint
post
shocks
slammed
stock
trans
truck
tune
wheel
wheels
Ok ok, I know I'm jumping the gun a little bit since I don't even have the truck yet :rofl: But I'm so freaking excited that I had to post.
Little back story of how this came about. Lisa is my second cousin and her husband (Frank) got this truck from the original owner's widow when he passed...
Haven't been very active on here & I've been needing to make a build thread so to start it off... I Received this truck at the beginning of my sophomore year. Nothing special to a lot of people but for me, as ugly as it was I thought it was pretty cool truck with a lot of potential. I got it...
This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
By continuing to use this site, you are consenting to our use of cookies.