bags

  1. B

    tires? ground clearance? 5/7 NBS ECSB oem 20's

    I have been searching and lurking and checking out some damn nice trucks on this site but still have some questions. My '02 NBS ECSB 2WD is currently lowered 3/4 with coils and hangers/shackles. I am running Tahoe 20's. I want to go lower but wondering what clearance will be like...
  2. B

    canti-lever air suspension questions?

    I know on a parallel 4 link suspension, the link bars will be parallel at ride height. but how do you go about setting up a canti set up. ive read about mounting the bag a 1:1 or 2:1 ratio on the bar. I believe 2:1 will give more lift since its close to the tightest point of the angle of the...
  3. slicksierra

    Truck Rice

    Largest roll out of ricey truck I have ever seen very few clean ones besides the first few chevy's
  4. alxs210

    Alex's 2010 Silverado CCSB

    It's a 2010 with a 5.3l engine and 4wd. I've lowered it 5/7 and done other small things to it since like led's, tint, etc. When I first got it a couple months back. Put in some leds Then I got all my parts from Belltech and McGaughys consists of belltech 2" lowering spindles...
  5. 2

    05 CCSB slow build

    So back in June '12 I picked up an 05....been doing lil things here and there since I got it and figured its time to document most crap Ive done. 05 2wd ccsb, 5.3 LS loaded minus leather and sunroof, with 98k. $9500 At the PO's Sweet holograms Once I got done cleaning it some...
  6. F

    towing/hauling

    How are all off you static dropped guys still able to tow and haul.
  7. G

    New From KY, GMFS and pt.net

    I'm new here at this forum. Noticed a lot same tool bags from GMFS on Instagram were on here so thought I'd join too lol I use get on pt.net a lot also but do not have my cammed truck anymore so kinda makes me sad get on there. I have had several trucks: Use to have: 95 Tacoma tint '03 spiral...
  8. Wicked Mayhem

    nuttin new

    Nothing has changed.. besides 1.5" spacers in rear.
  9. iTzTy

    New here,

    I just thought I would introduce myself. I came from other forums about gm/silverados, and I thought this one would be one I liked. I drive a 2010 Silverado 1500, Red, with a couple of cheap mods done to it for now. lol
  10. T

    Truckin1081s 08 CCSB slow build thread!

    Truckin1081s 08 CCSB build thread! Well I couldn't wait to get my old truck sold before I pulled the trigger on a new to me one. Picked up this 08 Crew Cab Sierra SLT from a guy in West Memphis, AR. Haven't had much experience with the NNBS trucks yet so I'm pretty excited about it...
  11. A

    07 AVY LTZ bagged project help!

    Hey guys I'm new on the site and looking forward to meeting some other truck enthusiast. I am looking into getting my truck bagged myself but need some help on what all I will need to get the job done. If any fabrication is needed I got that coverd for the most part. From what I hear its 8,000...
  12. TheSuspensionSource

    Belltech 5/8 & Wilwood Brakes on NNBS Reg Cab

    I have to admit this is the week I have been waiting for since I sprained my ankle getting out of the truck. Ya it's okay you can laugh. Our truck features a Belltech complete 5/8 lowering kit, Wilwood braking system, Airlift helper bags with a WirelessOne system finished up with a Viair air...
  13. T

    For Sale: Bagged 02 Sierra

    This is my 02 ECSB Sierra with a 4.8. It has 102000 ish miles on the motor, changed every 3000 with Mobil One. The transmission lost the sun gear in it so it is being rebuilt right now. Im having a Vette Servo put in it while it is apart. The front is set up with the Ekstensive Metal Works...
  14. Tukn4s

    Tukn4's new pictures

  15. 06_crewcab_ss

    McGaughys Drop Leaf Springs

    Anybody ever used drop leafs from mcgaughys? Was planning on going 4/6 but not sure after thinking about some of the roads I have to drive on everyday so i started thinking about just doing spindles and shackles until I found these leafs. I haven't seen anybody using them on the web and wasnt...
  16. D

    Decisions decisions

    As I prepare for moar low I also want new wheels. So I did a quick chop to help me decide. Opinions welcome, a-holes aren't :crossarm: How the truck sits currently Chop1: polished tbss (was trying to match low light) Chop2: black tbss
  17. mike.

    81 C10 swb

    Been forever since I've been on. Finally got another fullsize. 1981 C10. Plans: bags, four link, z the front. Either 22s or 24s. Something simple and reliable.
  18. Chris.G.Jr.

    Chris G's 1967 C10 Thread

    Well I have had the truck for almost 4 years and its been a great truck! My dad and I got the truck from my dads friend for like 4500 truck would run somewhat but a little rough, big plus was its a #s matching original truck (except the color). The truck has: 327 Small Block Chevrolet 2 speed...
  19. M

    Firestone helper bags question

    So I can get this for pretty cheap http://www.summitracing.com/parts/fip-2250 but it's only listen for the 2500's and firestone does not make a kit specifialy for the 1500's. My question is can anyone see why this wouldn't work on a 1500? Or does anyone have any idea what it would take to make...
  20. Laydsierra

    Nnbs gauge pod??? Need help finding something

    I have a 2012 gmc and I need a single gauge pod to mount a gauge for my air ride, thought I found a guy that makes em for the cubby hole, but he quit making them.... What to do now can't even find a double or triple pillar pod.... Was gonna order a Dakota digital gauge to monitor my bags and air...