1500

I had been waiting for a good 'test subject' to perform a full paint correction on using the new SCG Pro polishes and luckily this 750Li belongs to a friends dad. Lots of swirled up paint (forgotten how big these 7 series actually are) to show what the polishes are capable of and since the job...

Well most of you know I picked up a new truck, a white 2006 GMC Sierra Z71 crew cab 5.3, 4.10s, just passed 75k miles on the way home LT2, charcoal cloth, buckets/console, Bose, steering wheel controls I bought it with level keys, NNBS GMC 17s, like 30% Terra Grapps, oldddd tonneau cover and...

LIFT PARTS off of a 2006 silverado 2wd Located in DFW, Tx All prices are plus ahipping if shipped Zone 1.5" body lift $100 Zone rear bumper brackets to lift bumper from body lift $20 3" lift spindles $160 1.5" wheel spacers (2) $40 2" daystar coil spacer kit $60

so anyone looking for mid travel we have a few kits laying around for 2000-2010 2500s. it consists of uca's,lcas,spindles,shock towers, axles with lifetime warranty,bypass shocks,coilovers with springs and heavy duty steering. retail is 9300 but i can get you hooked up since this forum. we were...

Well I haven't made a build thread yet, and truck is starting to take shape, and I have some questions, and need some input, so it's time to make a build thread. Some back peddling. Sold my 2007 Vokswagen Jetta, Bought a 2005 Polaris XCSP 600 & Bought the truck (2000 Chevy Silverado...

DISCOUNTS VALID STOREWIDE! Including the the ALL NEW SCG PRO POLISHES, SEALANT, AND PADS! RAPID ALL-IN-ONE™ POLISH: The fastest way to a swirl free and protected shine in ONE step! MACHINE CUT™ POLISH: Correct even the most swirled and damaged finishes, removing up to 1500...

First off hello, I'm new here but I heard of the site from some GMFS guys and figured I'd join. Here's my last truck 2003 Silverado 1500 that I just sold And now on to the "new" truck, I just purchased this 2000 Silverado 2500 with 65,000 on the clock, old man owned, hasn't seen a...

Want to see what kind of interest there is in my wheel setup. I purchased the rims December 2013 and only had them on the truck for about a month and pulled them off and they sat it my room until about a month ago. I purchased a new set of 33x12.50.20 Toyo Open Country M/T's and installed them...

Hey guys my name is Adam and I'm brand new to this page, my ride is a 2008 chevy silverado 1500 regular cab short bed. I got the truck in October of 2011 I'm the third owner of the truck and it's my daily driver, I got the truck almost completely stock and changed a few things here and there...

Just figured I would post some pictures recent pictures of my truck up at silver lake and around home. A nice shot of the Mag- Hytec and Bilstein 5100s 3" to a 3.5" inlet 6" outlet tip My 1/2 ton with a co-workers 08' duramax Me and my buddy on top of test hill Up on test...

Hey guys, Im on this site all the time, but I rarely post, but i figured it would be fun to start a build thread on my 03 1500HD. I have done a few minor mods already, and im planning on more in the future. Bought the truck right before Christmas 2012. I was driving an 03 Tahoe and I also had...

Hey guys, the time has arrived for me to sell the truck. Besides a few listings locally I'm working on the eBay listing as well. I'll post the link up for that once complete. For more info you can go thru the entire build thread here to find out everything completed. Below is a link to the...

As you may or may not know I sold the 01 a few weeks ago, today I picked this up... 07 sierra 1500 ecsb slt z71, black leather, center console, power everything, heated seats, the whole 9 yards. Won't be lifting or lowering it for a while, maybe a leveling kit eventually. Remove molding, maybe...

Have some new MOOG parts in the garage I want gone. All parts should fit 99-07 Silverado/sierra 1500 (6 lug) 4x4. -Moog sway bar bushings (kit with both side bushings & clamps), brand new, bag opened, never installed. I couldn't get my bolts out. $10.00 ea (per kit) -Moog premium inner &...

Hi guys my name is Trey, I've been following the customgm page on Instagram and figured id join. I have a 2014 GMC Seirra 1500 and want to do a 3/5 drop. Thing is I've talked to many different people and sarched pics on the internet and it looks like the 3/5 in the rear is higher than the front...

Well 2 weeks ago I got a blinking light on my 2003 Silverado. It was Arrival Metallic Blue 2wd 5.3. it broke down on me on the service road by I-35 so I got a tow truck and sent it to a shop since it was still under warranty for 9000 miles. I got the call this passed Monday saying I had a bill...

Okay, so I'm looking at replacing my headlights and I really like the look of halo type lights. Now, before I go any further, I know there are better options like oracles and such, but I'm about to head off to college and do not have allot of spare money, so I flat out cannot afford the custom...

My name's Tyler Aucoin, some of you may already know me from Instagram. I just attended the 4th Annual CGM truck meet, and met tons of awesome people. Time to get on the forum. This is my truck, 2004 Silverado 1500 Z71, 6.5" BDS, 5" blocks, 20x10 Moto Metal 954(discontinued), 33x12.50x2" Atturo...

I am planning on doing a sas on my silverado 1500 and changing outfrontout the front and rear axles and making it an 8lug can anyone give me some ideas on the best axles and transfer case

2009 LY6 6.0 complete pullout for sale. Bought it from Tim Jordan's salvage yard in Crandall. Ran before being pulled. Exact mileage uknown...but who really plans to pull a motor and install without at least replacing gaskets? I am in the Frisco area. No I won't deliver. I decided to sell my...