Search results

  1. T

    Daniel's Denali

    I just looked it up and its what I thought it was. I came across that before looking something else up. Thanx.
  2. T

    Daniel's Denali

    Do you happen to have any pictures of where and how much you cut? Did you just have to cut the backside of the fender by the firewall? Did you have to clearance anything in the front of the fender on the grille side? There is a fender mod called the norcal nick mod, is that what you did? I dont...
  3. T

    Daniel's Denali

    Thank you Alex. His set up looks badass, but im not willing to cut up my fenders. I know I've seen his set up posted before, I just couldn't find it last night.
  4. T

    Daniel's Denali

    I read through the last few pages and couldn't find what your set up is. What is your suspension and wheel tire set up? Any modifications or rubbing? Im seriously considering doing this with my truck.
  5. T

    nickyreno's Build Thread

    I have these for reverse bulbs -http://retro-solutions.net/product-info.php?3156_3056_3157_3057_3457_4157_T20_5W_CREE_LED_Reverse_Wedge_Bulbs-pid704.html, they are bright. I have 20% tint and i can see just fine backing up at night. I have leds in my dome/map from super bright leds, but they are...
  6. T

    NNBS Dome/Map Light Leds

    Hi all. I am looking at buying these - 6K WHITE 15 LED HIGH OUTPUT DOME LIGHT BULB 345LM 42MM 211 211-2 578 - Festoon Dome Vanity - Shop Bulb Type, does anybody have these or anything similar? If so, are they worth the $20? Also, how bright are they? I currently have ones similar to these -...
  7. T

    For Sale: NNBS HD Denali Grille

    SOLDHD denali grille already modded to fit the 1500 bumper cap, I installed this grille and took it right off. Looking for $300 plus shipping in the lower 48 states. I have included pics of where I modified it.
  8. T

    Painting exterior plastics

    Hey guys. I want to paint my mirrors, door handles and tailgate handle/bezel on my 08 sierra. What I need to know is the best way to sand out the texture to make them smooth? I read that wet sanding with 180, 220 then 320 would work, anybody do it this way? Also, my dad can paint but he has...
  9. T

    Daniel's Denali

    On my 08 sierra you hold lock and un-lock on the remote at the same time to activate the tpms relearn, found that info in my owners manual.
  10. T

    NNBS leaning on passenger side with MCgaughys

    My 08 crew was a 1/2" lower on the driver side. What I did was take the strut out and added 1 ring to raise up the corner a 1/2" I also tweeked the rear shackles. Someone told me to loosen the shackle bolts on the lower side and let it droop. I had my dad push down on the rearend and tightened...
  11. T

    Opinion's on blackbear autocal tune

    Well, I've decided to get a BB tune in the spring. My next question is, should I do the vette servo as well?
  12. T

    lowering tip

    I was gonna do a 2/4 myself, but said f#@! it and went 4/6. 4/6 isn't all that low on these trucks, especially if you have stock size tires like you do. I drove my 95 silverado 2WD with a 4/6 in the winter for a few years and never got stuck. My 08 is 4WD with a 4/6. Is yours 4 wheel drive? I'm...
  13. T

    Opinion's on blackbear autocal tune

    That sounds like what I am looking for, like you said the truck feels sluggish and the trans feels loose/sloppy. If I remove all the TM, will I have trans issues down the road? I have been running 87 octane since new, the dealer said it would run fine on that. Should I switch to 89 or even 93...
  14. T

    lowering tip

    In the front you can do springs, adjustable struts or spindles to achieve a 2" drop. Out back you can do shackles and block removal or do a flip kit with lift hanger and lift shackle. I'd stay away from drop leafs, people say they don't ride good.
  15. T

    lowering tip

    Go 4/6, like stated above it takes alot of drop to get these trucks really low. I have a 4/6 on my 08 crew, with no notch and I don't bottom out. I used energy suspension pancake style bump stops for the most clearance. My drop is all belltech, kit #647sp. Comes with adjustable struts, spindles...
  16. T

    Opinion's on blackbear autocal tune

    Ah ok gotcha. I have read that it has a slight delay. Have you ever gotten a BB tune on a stock truck? Did it make a difference in driveability?
  17. T

    Opinion's on blackbear autocal tune

    What does DBW mean? Do you think running 93 over 87 octane will be a noticeable difference in performance?
  18. T

    Opinion's on blackbear autocal tune

    I am thinking of getting the autocal tune from blackbear, my truck is a 2008 sierra crewcab 5.3L. I know I want to disable afm and get my trans tightened up. Other then that, should I just let Justin do his thing? From the guys that have a autocal tune, does the tune come with a 87/89 and a 93...
  19. T

    New wheels on my NNBS

    I bought it from summit racing, free shipping. http://www.summitracing.com/parts/bel-647sp/overview/