Search results

  1. SportTruckPros

    Important!: info when selecting a lowering/lift kit for your 2015-2017 GM Truck.

    This is important info when selecting a lowering/lift kit for your 2015-2017 GM Truck. GM made things a real pain in the ass with the three different control arms that come on these trucks. • Cast Control Arms • Stamped Steel Arms • Aluminum Arms It is very important you check your truck before...
  2. SportTruckPros

    Important!: info when selecting a lowering/lift kit for your 2015-2017 GM Truck.

    This is important info when selecting a lowering/lift kit for your 2015-2017 GM Truck. GM made things a real pain in the ass with the three different control arms that come on these trucks. • Cast Control Arms • Stamped Steel Arms • Aluminum Arms It is very important you check your truck before...
  3. SportTruckPros

    Airshocks on NBS 4/6?

    Loosen the shackle bolts while in the air, lower to level ground. Jump on the rear bumper. This will "cycle" your suspension. Then tighten the bolts while its on level ground. This sometimes will cause an unlevel appearance.
  4. SportTruckPros

    2013 GMC Sierra Denali Lowering Kits

    I do recommend staying the the 3/5 to 4/6 range. I had a customer who went 5/7 ended up just having issues with the CVs. Did you want me to build you a kit based on what I have read in the thread?
  5. SportTruckPros

    Airshocks on NBS 4/6?

    Did you tighten the shackles when the truck was in the air or on the ground?
  6. SportTruckPros

    lowering answers needed here

    Your alignment will need some help but it will all work.
  7. SportTruckPros

    Airshocks on NBS 4/6?

    I would avoid air shocks seeing as they can ride fairly stiff. The rear is 3/4" lower than front?
  8. SportTruckPros

    2013 GMC Sierra Denali Lowering Kits

    How low are you looking to go is the question. Belltech does hands down have the better shocks but depending on how low you want to go may not have an option for you
  9. SportTruckPros

    New Guy From Ohio...

    And here I am!