Recent content by slonlow2000

Any idea if all the gauges in the cluster work? And was it a gas 2500?

I'd still have to have a dealer program the mileage for another $90 charge.

I opened it up and looked at the board, all I could see for sure was the yellow around several of the resistors. No visible breaks in the solder so I put it all back together. I'm good with led replacement and things like that but was lost on what to actually fix.

I bought an old high mileage 03 that the cluster goes out at times, all the stepper motors go out at the same time. From what I've been reading the small packs of resistors in the cluster overheat and yellow's the board. I took mine apart and found that, but no idea how to fix it. Have you guys...

Its been painted on the driver side, figured that out when the pulled the molding off. That and the tan is pealing under the molding a little. I'm still trying to decide what to do with the tan since its pealing. I really need to fix the rust in the rockers and corners thought before I go crazy...

On to the interior. Its was horrible... not sure how you let you vehicle get like this. Untitled by Gabe Reed, on Flickr Untitled by Gabe Reed, on Flickr Untitled by Gabe Reed, on Flickr Untitled by Gabe Reed, on Flickr One thing lead to another and I ripped out the interior to take to work...

I work at a Chrysler dealer at the service desk. A couple weeks ago we got a high mileage, rusty, 03 ecsb traded in and I bought it before the wholesaler seen it. Its got 215000 miles but still running strong. I needed a truck to use as a truck since my sierra is too nice to get into some...

I know I was just joking around, as far as the wheels really just trying to trade locally now. If I sell out right I'll have to have another set ready to buy.

Figured I'd updated this with some pics. Haven't done much. I went and bought a high mileage trade in here from work so I've been spending some money on. Untitled by Gabe Reed, on Flickr Untitled by Gabe Reed, on Flickr Untitled by Gabe Reed, on Flickr Still trying to trade these damn...

Thanks I need to update it. Liking the progress on yours. I like the paint design, keep it up. And yeah buying one with work already done is way cheaper to make your own with a few tweeks.

This is way cooler than my bought not built thread lol.

Heres some pics to get this up to date. Setting up the new rails with notches Untitled by Gabe Reed, on Flickr Untitled by Gabe Reed, on Flickr Moving around the bag position looking at different options. Untitled by Gabe Reed, on Flickr Reason we went here was because if it was on the...

Well its snowballed into a new back half. We found the reason my bed gap was uneven was due to the frame rails sagged during the notch install. We talked about trying to straighten it, but after it sagged the plated the frame and added cross members so its way to solid to try and bend back. We...

Willing to split off 2 of them or is it all 4 or nothing.

I see extended is 19, do you have a compressed measurement? or a part #. I need some new rear shocks and would like to run fox if at all possible.