I'll change wheels when the damn thing runs the rear will be fine with it being n/a. The 8.8 I was going to get sold.
Sent from my iPhone using Tapatalk
Excuse the dirty engine bay. I'm testing the fitment for making a notch on the inside of the passenger side of the frame. Doing this so I can keep my low mount ac.
Pulled motor to notch the frame oil pan hit the crossmember so i had a buddy notch it with his plasma cutter. In the process of smoothing and cleaning it up to box it back in. https://vimeo.com/186011243
Ups man delivered some Brian tooley stuff today. Went arp crazy and got all my gaskets. Going to put the short block together plumb my fuel system and start on wiring.
Sent from my iPhone using Tapatalk
Ups man delivered some Brian tooley stuff today. Went arp crazy and got all my gaskets. Going to put the short block together plumb my fuel system and start on wiring.
Sent from my iPhone using Tapatalk
Took one more look at the bottom end before I assemble the short block tomorrow.
Sent from my iPhone using Tapatalk
We'll finally catching a break with school and work so I put the short block together and moving in to fuel and wiring.
Tbss intake and accessories all lined up gonna pull the clutch fan and paint everything tomorrow bought a set of e-fans
Sent from my iPhone using Tapatalk
Tbss intake and accessories all lined up gonna pull the clutch fan and paint everything tomorrow bought a set of e-fans
Sent from my iPhone using Tapatalk
Bought some braided fuel line and an fittings.
Got the fan clutch off everything's ready for paint.
Made a bracket to support my corvette fuel regulator/filter.
Sent from my iPhone using Tapatalk
Got the fan clutch off everything's ready for paint.
Made a bracket to support my corvette fuel regulator/filter.
Sent from my iPhone using Tapatalk
Doing some cutting on the core support to move the radiator forward https://vimeo.com/191194073
Swapped the 60e I had for an 80e with a buddy that needed a 60 for a simple project
Trans looked good inside clean besides a dirty filter. https://vimeo.com/191194499
Motor fits great just need to make a trans crossmember for my 80 get all the wiring and fuel done then have a driveshaft made
Sent from my iPhone using Tapatalk
Swapped the 60e I had for an 80e with a buddy that needed a 60 for a simple project
Trans looked good inside clean besides a dirty filter. https://vimeo.com/191194499
Motor fits great just need to make a trans crossmember for my 80 get all the wiring and fuel done then have a driveshaft made
Sent from my iPhone using Tapatalk
So now that it has a 6.0/80E it definitely needs a 9" thats been chopped down and some big ass tires out back
It'll probably have a 8.8 have an explorer that a relative has with a blown motor that he just wants cleared off of the land told me 100$ and he'd give me the title.
Thanks buddy hoping to wrap it up just ready to drive the damn thing
Sent from my iPhone using Tapatalk
Well decided a bigger single got it Tuesday. Almost went with a billet 78/75 but decided a 88/83 instead
Sent from my iPhone using Tapatalk
Sent from my iPhone using Tapatalk