TILLER

Well-Known Member
Aug 28, 2012
2,034
34
48
34
Hallsville Tx
Does the axle hit the frame at 7"?

Sent from my SM-G935V using Tapatalk

It didn't when I drove it around. But my buddy who was the same height on his 15 said it would if you hit a bump going fast


Sent from my iPhone using Tapatalk
 

dszx13

Well-Known Member
May 28, 2014
5,500
1,610
113
34
minden, la
Rcsb shouldn't. Ec an cc on nnbs are heavy in the rear so they do. Curious about the newer trucks. Yalls roads are nice tho. Lol.

Sent from my SM-G935V using Tapatalk
 

TILLER

Well-Known Member
Aug 28, 2012
2,034
34
48
34
Hallsville Tx
Finished up completly. Got hitch but back on, on the 14 and up if you don't put the bolts in the side where the hitch mounts you will have a floppy bumper due to bumper bracket using the same hardware as hitch to mount. Also got it aligned everything was in spec except caster which was like -5* off any ideas on how to fix this?


Sent from my iPhone using Tapatalk
 

dszx13

Well-Known Member
May 28, 2014
5,500
1,610
113
34
minden, la
Did you have offset uca bushings? Or the 1 degree cam plates?

Sent from my SM-G935V using Tapatalk
 

TILLER

Well-Known Member
Aug 28, 2012
2,034
34
48
34
Hallsville Tx
Did you have offset uca bushings? Or the 1 degree cam plates?

Sent from my SM-G935V using Tapatalk

No, I didn't get any. The truck doesn't have the regular cast uca and lcas they're like a stamped steel. I have to order different spindles because they're not the cast type


Sent from my iPhone using Tapatalk
 

TILLER

Well-Known Member
Aug 28, 2012
2,034
34
48
34
Hallsville Tx
414134b89e6a8f2a4354fc750a99adf6.jpg
got around to removing the badges and bow tie from the tail gate today


Sent from my iPhone using Tapatalk
 

Oktain

Canuck Admin
Staff member
Feb 9, 2012
4,965
224
63
33
Sudbury, ON
FUCK, how much rake did you have stock!? I'm sitting at 2/4, and no way another inch in the rear would have me sitting as level as you. I'm looking at probably a 2/6 or 2/7 to sit level, it's ridiculous lmao

Would you mind posting up a rear ground to wheel well measurement? I'm curious if I'm actually 3" taller than you in the rear or not.
 

TILLER

Well-Known Member
Aug 28, 2012
2,034
34
48
34
Hallsville Tx
FUCK, how much rake did you have stock!? I'm sitting at 2/4, and no way another inch in the rear would have me sitting as level as you. I'm looking at probably a 2/6 or 2/7 to sit level, it's ridiculous lmao

Would you mind posting up a rear ground to wheel well measurement? I'm curious if I'm actually 3" taller than you in the rear or not.

32.5 on the drivers side and 33 on the passengers side



51bfff6f362588eae02067c06e0dd538.jpg

The rake was retarded


Sent from my iPhone using Tapatalk
 

dszx13

Well-Known Member
May 28, 2014
5,500
1,610
113
34
minden, la
Told my wife i won't get a new truck. These new Rcsb look bad af.

Sent from my SM-G935V using Tapatalk
 
Last edited: