BB

Well-Known Member
Apr 8, 2013
1,080
216
63
Tyler, Texas
So this project has been going on since March of this year, and so I figured it's time to start one of these build threads... Here goes nothing!

For at least 2 years layindoor84 (Ronnie) and myself had been searching the interweb and shows looking for the right truck for me. I had been wanting to get a bagged truck to cruise around in and go to some shows in too.
We looked at countless trucks, talked to countless truck owners, and couldn't seem to find what I was looking for.

So finally layindoor84 (Ronnie) says, "let's just find a nice stock truck, and I'll build it!". Ronnie has built quite a few bagged rides in his day, and even helped out ekstensive metal works a few times with some overflow work, at his house, when they couldn't get to something.

Well, that was all it took.

After looking on craigslist, autotrader and the likes, we found the 02 RCSB that ended up being the right one.

The truck was in Beaumont, TX (3 hours away from where I live, in Tyler, TX). BUT, only about 30 minutes from where Ronnie lives!
So after we talked about it, Ronnie went and looked at the truck and told me, "man if it were my money, I'd buy it in a heart beat!".

At this point I had only seen 1 or 2 pretty blurry pictures of this truck (the guy selling it was in his late 60s, and a bit shaky with the camera...) But I trusted Ronnie's opinion on it.
I wired him the money, he went and bought the truck, and took it back to CP Suspension Works where the transformation would take place.

After 4 months, a lot of sweat, and a pile of money, the truck is almost ready for delivery.


I gotta say, to have a friend like Ronnie is isn't what most would consider possible. He is one of the best guys I know, hands down! (no homo.... lol)


But that's enough about the story, here's the truck!


Thanks again homie!


98DB0C67-D7C0-41C1-8D78-1A4496DA0DBD-1183-000001BBCCDCE670.jpg

1EBD0CC3-1243-4254-A46A-77F68308CCF0-1183-000001BBBA776C54.jpg

5013AB53-6E86-4562-994E-E94F8D6B5F1E-1183-000001BBC293B174.jpg

76A99B24-F289-435C-ACB2-1F16E6D4DEB8-1183-000001BBD6C6B639.jpg

A0BD3FBD-28B0-486F-A9F7-C67656542BB3-1183-000001BC4F355557.jpg

BF184242-71E0-4D40-AF87-CE163C9366E7-990-0000010EF8491085.jpg

8AA99B7D-EBD9-4DA3-8001-7F129C9CC099-990-0000010F0A799BA5.jpg

E18088EB-B76C-475C-BD10-CF5321D2BF02-990-0000010F02ABAD7D.jpg

D00435C1-598F-4BDD-90C8-92EE60E98AA5-990-0000010EB02836F9.jpg

52021D90-5B73-41BF-8FC3-268DFACC258C-1183-000001BC5AB06DB1.jpg

04DF7DC4-7F56-4A50-81C8-386725D2BA08-3059-00000293143A8228.jpg

36291A72-3CF3-446F-9B4D-464F94690E7C-935-000001693BE599B1.jpg

F0DB863F-1C3A-4941-A4FB-D5CECEE65DF6-990-0000010F470452B8.jpg

4BD805AF-2C7B-4C4B-965A-474464681754-1183-000001BCE5C42ED5.jpg

43CF8930-696D-4632-B30A-96A613F91D95-990-0000010F1AD3536F.jpg

81C8C27A-7222-4F7B-B8DA-B7990A55F9EE-990-0000010E8C967A33.jpg

A9FAD551-27B8-4B15-A5CE-583CE0010E8F-990-0000010EA05DFA02.jpg

D32DE900-9525-4718-8BDA-4A5FFF37F663-990-0000010F24BAF717.jpg

E1B39028-055F-42BF-9AC8-3821F143CA7C-990-0000010F2E9B2487.jpg

FA9460E8-16BF-4C58-943C-C1C090AEFCA4-990-0000010E7A66E834.jpg

A2301F12-944F-4A27-921A-7E20F70597EA-990-0000010E72912335.jpg

A6C6590C-FEAB-4007-AF52-45E483EA2F4C-990-0000010E809D828E.jpg
 
Last edited:

BB

Well-Known Member
Apr 8, 2013
1,080
216
63
Tyler, Texas
The truck is bagged on 24" Marcellino Concepts. We used the EKMW 24-28 kit with 2 link rear, on Air Lift bags. The rear axle was narrowed 1.5" on each side, and Moser axle shafts went in to complete the rear end. The firewall was tubbed, the inner fenders were replaced by a set of trailer fenders, and fabricated to fit. The coolant overflow was relocated along with the ECU and fuses. The vacuum brake system was replaced by a hydroboost system. The transmission cross member was modified and flushed with the frame rails.
 

BB

Well-Known Member
Apr 8, 2013
1,080
216
63
Tyler, Texas
Thanks man! It has the 4.3l in it. It will get a new heart at some point.. Will probably put a 5.3L in it.

Here's a better picture.
CB91464C-B26A-41BC-A280-63A85A1928C6-1183-000001BFFCA89B33.jpg
 

BB

Well-Known Member
Apr 8, 2013
1,080
216
63
Tyler, Texas
ok makes sense now. I knew by the intake it wasnt LS based, and was curious.

It will make a great bagged crusier though

Thanks! It will be a great cruiser for now, It will eventually get a new heart beat... Then I'll be able to do some nasty burnouts! lol


thats a nice little truck ya got there :happy:

Thank ya!


That is bad ass!

I know right? lol! Thanks bud!


looks like it was a clean virgin truck when you bought it, way to ruin it! :crazy:

Good work man, makes me want 24s

Dude, it's way clean! Not a scratch or dent in the paint. Not too bad for a 12 year old truck! 24s look so good on these body styles, I couldn't have gone any smaller and been so pleased with it...

Oh, and all the credit on this one goes to Ronnie (layindoor84) !!!!!!!!
 

BB

Well-Known Member
Apr 8, 2013
1,080
216
63
Tyler, Texas
I ordered some Esky handles last night. I will post more pictures of it once I get it back up here and detailed.

I can't wait to drive this thing! I've owned it for 4 months and still haven't driven it. lol
 

Smith

Super Moderator
Staff member
Jan 28, 2011
7,167
398
83
Louisiana
Looks good man. Def looks like he did a good job on it. You'll have to drive it over to Shreveport for a meet sometime :shake:
 

BB

Well-Known Member
Apr 8, 2013
1,080
216
63
Tyler, Texas
Looking good, liking those wheels more everytime I see them.

Thanks! I am loving the way it looks too!



Looks good man. Def looks like he did a good job on it. You'll have to drive it over to Shreveport for a meet sometime :shake:

Thanks man! He did a GREAT job on it! I might hit up the next meet over there. When is it?



Kinda wish I had kept it for myself.lol

Fuck that! lol! You have it for another week, drive the shit out of it homie!
 

Tukn4s

Well-Known Member
Jan 24, 2011
1,856
268
63
you should get another set of trailor fenders and over lap them to cover the entire tire up.
y2uhe8yh.jpg

eve8apys.jpg
 

Dakota

Dat Static 4wd
Mar 12, 2012
15,997
1,041
113
texarkana
Looking good man..im not too far from tyler myself, next time im around that way I may have to meet up and check it out, I love the wheels