James Pate
New member
My stuff takes forever every time lol. always a week plus if not longer
01 Sierra Build
- Thread starter billnewl
- Start date
fuckfaceon33's
New member
I can see it taking longer if its not an actual shop, just one guy doin it.
billnewl
North Born, South Bound
New Moog pitman and idler are on, rear axle is disassembled, idler brace is welded on and painted. Front diff is trimmed, test fitted, painted with primer/silver base/red. The half-shafts are painted with primer/silver base/red and all I have left to do is put another coat of red, then clear them and the front diff. The red came out looking sweet! I think it will look damn close to the powered parts. I was in a rush at the end to finish up, so I didn't get a chance to compare the parts or get any pics. 
billnewl
North Born, South Bound
fuckfaceon33's
New member
Looks fuckin good. What was the whole process for the diff? Just scuff then adhesion promoter then shoot?
James Pate
New member
Fuuuuu looks so good!
billnewl
North Born, South Bound
Don't need adhesion promoter on bare metal. I wire wheeled as much of it as I could to get the dirt/junk off of it, for the sole purpose of just getting it clean. I used Krylon white primer, Krylon brilliant silver base coat, Krylon xmetal red and Krylon clear.
:shake:
James Pate
New member
Post new pictures!
billnewl
North Born, South Bound
:bishplz:
Thanks.
Still need to make a cardboard template and find somewhere local to cut me a piece of steel, but I am going to do a candy red backing plate.
Ask and ye shall receive...
kay: