Starter kit.

Dat surf city garage. Used up the last of my AIO and sealant from them this weekend


Sent from my iPhone using Tapatalk

I've got a decent stock of what I liked from there left. HydroSeal, Rinse Free Wash, Tire Dressing, the Polishes... DID order a couple DS refills!
 
I've got a decent stock of what I liked from there left. HydroSeal, Rinse Free Wash, Tire Dressing, the Polishes... DID order a couple DS refills!

It's funny my Acrylic Sealant was the consistency and color of peanut butter after sitting for like 6 months.


Sent from my iPhone using Tapatalk
 
It's funny my Acrylic Sealant was the consistency and color of peanut butter after sitting for like 6 months.


Sent from my iPhone using Tapatalk

I have two bottles. One that is like that and one that DvK managed to not have that happen to. For the PB one, I added a couple drops of distilled water, and just kept mixing it until it was runny enough to use. Took a while.
 
Check out AMMO NYC on YouTube as well as Obsessed garages as mentioned. You need a good two bucket system and a safe drying method. I use a leaf blower just need a constant fresh wax or sealant for it to work well. As far as correcting, look at the griots 6in I have it very awesome better deal and more power than a PC. I use Shine Supply for my compounds along with a microfiber cutting pad followed up by CarPro Essence with a foam pad. Then CarPro Reload as a sealant. Also as previously mentioned you need a good decontamination before correction so I would use a paint Decon spray like an iron and tar remover then clay.


Sent from my iPhone using Tapatalk Pro
 
  • Like
Reactions: TechieTruckGuy
Bumping the hell out of this.

I finally got me a hf polisher. I don't plan to make it show worthy but maaaa e it black again with less scratches. I've been following a group called clear finish products and seen a bunch of before and afters of their products at work and think I'm gonna try it.
3c2e8f02c71d46379744ff5d2957db5d.jpg


Sent from my SM-J100VPP using Tapatalk
 
Bumping the hell out of this.

I finally got me a hf polisher. I don't plan to make it show worthy but maaaa e it black again with less scratches. I've been following a group called clear finish products and seen a bunch of before and afters of their products at work and think I'm gonna try it.
3c2e8f02c71d46379744ff5d2957db5d.jpg


Sent from my SM-J100VPP using Tapatalk

I have a HF polisher too. But mine is like 3 years old now, I swapped out the backing plate with a 5inch "Astro Pneumatic" backing plate that I copped off amerzon for like 7 or 8 bucks. Oh, and don't bother with the Harbor Freight backing plate or the cheap ass pads they sell at Harbor Freight. I got some Chemical Guys hex-logic pads, and I have an older set of Adam's microfiber pads. For polishing, I have the Adam's two step polishes, and I have the Megiuar's M105 and M205 which actually seems to produce better results than the Adam's, but it does leave a lot more dust than the Adam's Polishes.
I'm in a group on Facebook called "Detailing for Dummies" and a lot of people swear that HD Speed AIO is the best shit known to mankind.
But I have never tried it personally. I'll use up all the polishes, compound and waxes before I end up buying more shit. If you want to come by one day when you are off you're welcome to raid my stash and try out whatever you want. Just let me know.
 
I have a HF polisher too. But mine is like 3 years old now, I swapped out the backing plate with a 5inch "Astro Pneumatic" backing plate that I copped off amerzon for like 7 or 8 bucks. Oh, and don't bother with the Harbor Freight backing plate or the cheap ass pads they sell at Harbor Freight. I got some Chemical Guys hex-logic pads, and I have an older set of Adam's microfiber pads. For polishing, I have the Adam's two step polishes, and I have the Megiuar's M105 and M205 which actually seems to produce better results than the Adam's, but it does leave a lot more dust than the Adam's Polishes.
I'm in a group on Facebook called "Detailing for Dummies" and a lot of people swear that HD Speed AIO is the best shit known to mankind.
But I have never tried it personally. I'll use up all the polishes, compound and waxes before I end up buying more shit. If you want to come by one day when you are off you're welcome to raid my stash and try out whatever you want. Just let me know.
I'm in that group too. That's where I found the other group who use some stuff called p1 that they swear by. I've seen videos of it being used and really has me a believer. Lol.

Sent from my SM-J100VPP using Tapatalk