FFB's Milf-Slayer Build

[fortplainman]

so basically this is what has been done so far and pics of the install of the lift. also my plans and ideas in the last post.

heres my setup thus far:

2007 Chevy Silverado
victor red ECSB 4x4 LT
5.3 4l60e with 3.73's

MODS:
GMPP CAI
BlackBear Performance Tune
MBRP cat back dual exhaust
6 inch BDS lift with upgraded bilstein rear shocks and a 1 inch TGC leveling kit
33x13.5x20 Mickey Thompson AT on 20x10 Chrome XD Diesels(summer)
35x12.5x17 Goodyear Duratrac on stock steelies(winter)
cleared headlights
LED reverse bulbs
LED fog lights/HID headlights
20% tint on front sides to match and 5% front strip
4.88 motive gears with Eaton trutrac
billet carriage works grill bowtie
vette servo
billet antenna
2in rear wheel spacers

plans will be for spring:

wheels/tires(done)
zone UCA's(purchased)
FFR tie rods(purchased)
colormatched front grill (purchased)
colormatched front bumper(done)
hidden 20in curved lightbar behind bumper bar (done)
billet grill insert
billet bowtie(done)
stock tails(done)
colormatched handles(done)
tow mirrors/colormatched mirror caps (colormatched mirror caps done)
pull moldings (purchased)
colormatched rear bumper(done)
single exit exhaust with 4-6x12 dual walled tip dumped a little over the rear axle.

other things for maybe list and things depending on maintenance:

smaller rear block for stance
new slotted rotors
SS braided front lines(purchased)
new caliper if needed incase bleeder is siezed shut
fox coilovers(spec'd for bds lift like ~$1500 if i recall correctly)
correct retune from bbp
replace leaking rear shocks(done)
new abs sensor for left hub(rubbed on tire and rubbed through wire)(done)
switchbacks/leds and projectors from fastheadlights.(switchbacks purchased)
sound system/double din

 

[fortplainman]

got rid of bullbar and 2 inch spacer but regardless what i have in pics.



2007 Chevy Silverado ecsb 4x4 before:

Exhaust:

Bullbar(was a gift, probably gona lose it and put the lights behind the grill):

Intake:

lift kit parts:

Wheels/tires:

Heres some progress pictures of the install:

RAKE:

Injury haha:

 

[fortplainman]

and now with the 6 inch BDS black powdercoated lift, 2 inch Rouch country spacer up front, AAL/Block out back with upgraded BDS gas shocks(made by edelbrock). 35x12.5x18 inch BFG KM1's and 18 inch XD diesels. also debadged the tailgate and sides as well. fender measurements are 46.75 front and 45.25 rear:

with 1/2 inch spacer install and 10 bolt BBQ paint:

tinted window's and tails:

 

[fortplainman]

random pics from start to finish:

photoshop of what id like to have done to the wheels:

cleared headlights:

winter mode:

no bullbar:

VLED 9Watt LED backup lights:

 

[Bootstrap]

Taking this spot.

 

[fortplainman]

parts i got lying around waiting for install:

AND my favorite detailing supplies:

 

[Frogfish]

Geoff sell me that truetrac....

 

[Dakota]

Shit looks good man, nice work

Sent from my EVO 3D using Tapatalk

 

[fortplainman]

Geoff sell me that truetrac....

lol i wanna install it damnit just no time. just hit up the gearing thread over on pt.net and get a good deal.

 

[fortplainman]

UPDATE:

welp found out a local shop got a sandblaster so chrome will be no problem. so when i get a DD in a couple months my truck will FINALLY get colormatched.

i know i want the chrome front grille/bumper bar and rear bumper colormatched as well as the handles/tailgate handle but im not sure what else i should do.

should i have him paint the plastics black or the front plastic where the tow hooks are red/black like sam's old truck and the rear one black? maybe get painted tow mirrors, powdered suspension pieces? idk how far to take it as long as my budget holds up.

suggestions?

 

[Huck]

lgb :thumbsup:

I would do all the front chrome red and leave the black valence for contrast and to match the wheels, rear chrome red and leave plastics black, and PTM towz for sure

**oh and def get the wheels powdered like in that chop

 

[fortplainman]

thanks man.

yeah if its not too expensive ill see how much it is to do them up like that, i know they could be refinished they got some chips in them. probably expensive and id like to upgrade to 20x10's in a couple years when these tires wear out. worst off if its too expensive or possible to even do just the ring ill just get some plastidip and do it.

 

[BOO5TED]

Coming along nicely dude, probably get flamed for it but I DGAF. I actually like the bull bar on the truck. rly:

:yarly:

 

[Craig]

Looks good Geoff! I would paint the lower valance similar to what Sam did IMO. Makes me want to go buy some more Adam's products!

 

[fortplainman]

yeah i asked sam for some pics last night i think i might do that.

 

[BHB]

Is the lease up yet??? :roflmao:

Moar pics of that slick ass burb in the background!!! :read:










Seriously...Looks good Geoff!

 

[fortplainman]

lol whats good gregg. been bought out for 1.5 years.

 

[Nick]

Nice build thread you put together. It's coming along nicely.

 

[fortplainman]

thanks man. got the grille and emblem in today and put the tow hooks in finally, back to summer wheel/tire FINALLY! lol:

 

[BOO5TED]

Still thinking about the red bead locks? I think the wheels need something else to set them off.