Rear sway bars

Discussion in 'TimsSuspensionOnline.com' started by Iceman, Jul 1, 2014.

  1. Iceman

    Iceman New Member

    Messages:
    34
    Can you recommend a rear sway bar for a 2012 Silverado 1500 4x4 cc, I am running 2 inch drop shackles and the block has been removed for a total drop of 3 inches? Thanks
     
  2. JennaBear

    JennaBear Vendor

    Messages:
    522
    I have run Eibach in the past, never an issue. Contemplating Hellwig, Eibach or Hotchkis this go around.
     
  3. Jared

    Jared Administrator Staff Member

    Messages:
    20,648
    try hotchkis of hellwig
     
  4. Cheeny23

    Cheeny23 The Resident Wop Staff Member

    Messages:
    6,379
    i'd been looking at the hotchkis for a long time as well, but decided against it due to a change of plans. but thats who i would have went with
     
  5. Graystone

    Graystone Well-Known Member

    Messages:
    1,204
    I had a hellwig on my 02 and my uncle has had one on his 03 for 7 years.
     
  6. Khaos

    Khaos Bed Dent Club Founder

    Messages:
    20,287
    I have a hellwig on my rcsb. One of my favorite mods by far. Any one the brands mentioned will be a good choice though.
     
  7. Huck

    Huck GSU Eagle

    Messages:
    10,643
    Don't have experience on trucks but have used all those companies on cars in the past, all are top notch and a great choice. Nothing at all to worry about with any of them, but that being said, I see Hellwig being used the most by truck guys

    **also, make sure to pay attention to the specs of the actual bars. Hollow bars are generally stiffer as well as larger bars being stiffer
     
  8. DeanH1290

    DeanH1290 Well-Known Member

    Messages:
    4,617
    I may look into one for mine once I go low. Need to hug dem country roads :cheeky:
     
  9. Graystone

    Graystone Well-Known Member

    Messages:
    1,204
    Mine was on my 6" lifted rcsb. Handled great. I have one on my k5 too.
     
  10. Khaos

    Khaos Bed Dent Club Founder

    Messages:
    20,287
    Best decision you'll make, trust me.
     
  11. DeanH1290

    DeanH1290 Well-Known Member

    Messages:
    4,617
    I bet, since that's the roads I'm on 90% of the time. That's one of the reasons that I'm going to drop a bit.
     
  12. Ginger

    Ginger Bubbles

    Messages:
    23,880
    reducing dat flex
     
  13. DeanH1290

    DeanH1290 Well-Known Member

    Messages:
    4,617
    Is there any advantage to upgrading the front sway bar from stock? Might look into doing both when the time comes.
     
  14. Ginger

    Ginger Bubbles

    Messages:
    23,880
    just a little less body roll
     
  15. Khaos

    Khaos Bed Dent Club Founder

    Messages:
    20,287
    I just got upgraded mounts and endlinks for much cheaper. I am pleased with the results and how it handles now.
     
  16. BOO5TED

    BOO5TED Resident Smartass

    Messages:
    20,240
    I've got the hotchkis set, love them.
     
  17. Graystone

    Graystone Well-Known Member

    Messages:
    1,204
    This is the most activity this site has seen in awhile
     

Share This Page