ITDROPT

New Member
Jan 23, 2011
190
0
0
Denair, CA
It's time I put up a thread with pics of my project back up on the site. I'm sure most of you will recognize it. So here are the pics starting from day 1 to how it currently sits.

October 2002
4.jpg

3.jpg

2.jpg

1-1.jpg

5-1.jpg


Moldings were gone within a few days.
6-2.jpg

7-2.jpg

8-1.jpg
 

ITDROPT

New Member
Jan 23, 2011
190
0
0
Denair, CA
In June of 2004 I took it in to get a 3/5 drop which looked more like a 2/4. By then I had the SS front bumper, cleared headlights and Escalade door handles.
5.jpg

6.jpg


Then in July of 2004 I had bagged with KP cups up front and a KP 4 link with the bags over the axle in the rear.
15.jpg

14.jpg

13.jpg

9.jpg

7-1.jpg

beforebodywork.jpg
 

ITDROPT

New Member
Jan 23, 2011
190
0
0
Denair, CA
Everything was cool until 2 months later in September when someone thought it would be cool to hit me while I was leaving a Carl's Jr drive thru.
damage3.jpg

damage1.jpg

damage2-1.jpg


So I had the damaged door replaced and door/tailgate handles shaved plus a roll pan welded in.
P1010003.jpg

6-1.jpg

7.jpg


A few months after that a guy loses control comin down the street and the truck gets hit again.
P1010001.jpg

P1010003-1.jpg
 

Dakota

Dat Static 4wd
Mar 12, 2012
15,997
1,041
113
texarkana
Damn man this truck has been through some shit, definitely in its best stage now(not that it ever looked bad)..looking forward to seeing the trenz on it