Here we go yet again!
For those of you who follow my 98 dually thread or have seen elsewhere TLDR to the end. For those who are in the dark, I also have an 88 GMC K1500. We'll start with it's history. Grandparents bought the truck in 1988 brand new. It's a regular stepside K1500 350/700R4 truck...
2013
454
blue
build
college
convert
engine
gmc
interior
lift
lifted
mirrors
of
paint
shocks
sierra
stepside
stock
tbi
the
truck
upgrade
welds
wheels
z71
What are some of the uncommon or down right rare color options for the gmt800 trucks out there? Pics? I know there were some oddball greens and blues, ran across this the other day and it got me thinking..I know it's probably not factory but I'd like to see some of the rarer colors..
Sent...
2001
cars
color matched
colors
console
control
denali
duramax
engine
ginger
gmc
of
pics
sierra
silverado
steering
steering wheel
stepside
sticker
system
the
tire
transmission
truck
wheels
I have a 95 C1500 stepside lowered 4 in front and 4 in back (I didn't do it I just bought it and they cut 2 twists off the front springs and took a leaf out of the back and used a dropped spring hangar) My question is this; I just bought some used 18" wheels with 6 inch backspacing and I'm...
I bought a package deal on some head lights for my sierra awhile back. They came with tail lights and turn signals. The signals were junk, and I have a fleet side bed so these wont help me too much. They have all mounted tabs for the bulbs, and all mounting clips for the screws. They clean up...
1989 Chevrolet 1500 RCSB
350 V8 5.7 TBI
2WD - 5 Lug
I've had the truck for about 3 years now it used to belong to my papa and he gave it to me. Anyway I drove it for a while and tried to start on it as a project truck and just had a lot going on so I parked it and it's been sitting since. So...
Ok maybe not.
Brett invited me.
Anyway, I recognize a good amount of names here from my days over at FSC/GMFS/GMT400, so some of you might remember me as well. Probably more-so for my 88 than anything.
Here is my baby: 88 GMC K1500 RCSS. Bought new by my grandparents in 88. It's been...
Most of you know I scored a set of NNBS GMC 20s...didnt see anything on here on how to declad, so here we go.
I started off with these wheels, doesnt matter if you have the same ones I do or the other clad version, theyre the same wheel underneath.
"Other" rimps...again, wont matter as long...
Ok ok, I know I'm jumping the gun a little bit since I don't even have the truck yet :rofl: But I'm so freaking excited that I had to post.
Little back story of how this came about. Lisa is my second cousin and her husband (Frank) got this truck from the original owner's widow when he passed...
This summer i will be getting new wheels.Was wanting some chrome 20 by 14 fuel mavs then saw the pricetag so im thinking of settling with some moto metal 962s or some gear big block alloys in chrome. If anybody has any recomendations please comment and was thinkin bout getting 35 in nitto terra...
New to the forum but its my understanding a lot of GMFS members are here too. That's been my normal hang out for the past years but winter months got me bored and exploring lol
Old truck I was known for
New truck as of December
So far just colormatched tows and bumper pads its a 2011 ltz...
So I have a question for the more experienced. I am pretty new to this and need advice. I have a 91 Chevy stepside with a 350 in it and I want to upgrade to a 454. I'm not totally sure if this is possible but if it is I would like to know the best place to get a performance motor and the best...
This is the build thread of my truck this is when it was completely stock Then detrimmed/detrimmed her and put a billet grille in wasn't high enough so put on a 6-7.5 superlift kit with the dual shocks and she got a fresh detail also got some cheap ebay lights that tarnished away...
Hello im from Missouri and drive a 2001 ecsb chevy stepside z71 with a superlift 6-7.5 in kit with 3 in keys and trucks debadged with a few bolt ons under the hood. I still cant figure out how to post pics been at it for about an hour and I looked at the how to stick thread and it didn't help me...
For a very long time now everybody keeps asking me why I don't make a build thread. So today - I'm bored - and here it is. For those who don't know I have an 02 HD front end obsession. My two trucks are always works in progress but one I'm getting quite happy with the result. So without further...
As many of you fine gentlemen and ladies know, I am a man of severe stubborness and blind faith in my own abilities. This leads to me pretty much trying to make everything before buying the pre-made stuffs. Which sometimes leads to me getting pissed, waisting time and money.... you get the...
First day I got it in October 2012
About 6 months months after I bought it. Everything was the same lol
Leveling keys installed and cranked about 3/4 of the way.
Shaved the tailgate
Got some black 17 inch wheels. It stayed at this stage for a while since I couldnt make up my mind up...
Ok this is my build copied from gmt400 so it might be a little rough.
Ok so heres the starting point guys, Its a 95 with no rust except on the bed rails and a perfect leather interior except of course the drivers seat is torn. I alread got a body lift tires rims and 2" blocks on the way. Ill...
Hey guys I'm new to this site haven't done much browsing yet but I'll post what everyone wants to see pics! Haha
First is my baby a 1995 1500
Next I picked this up yesterday a 2005 2500 HD with no brakes and slight front end damage. It's a 6.0 with the 80e
Next is my DD a lightly modded 2006...
This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
By continuing to use this site, you are consenting to our use of cookies.