so injectors on the duramax are done and i am doing a bunch of other performance mods to make a race/daily truck.
any who since the truck will be torn apart i needed a new daily.
found this truck.
its a 1999 regular cab short box silverado 4x4 4.3 v6 manual.
has around 220,000km...
In the end, I've decided to keep my truck and start gathering parts to procharge next year. My intentions are to have a reliable daily driver running on pump gas that can really get down when I want it to at the strip one weekend and go to the sand dunes the next. I want to stay as economical...
2500hd
4l80e
6.0
black
boost
build
cam
change
custom
flex
fuel
heads
injectors
monster
of
post
racing
stock
suggestions
swap
the
transmission
truck
tune
upgrade
I picked up some low mileage ( 58,000 to be exact ) 243s off a Z06 this weekend and I had a quick question about milling them before I run them over to Texas Speed & Performance for some head work.
I have been told that milling them .030 will retain the factory compression with the 5.3 dished...
Some work I've been doing.. All hand done in Illustrator. Can be blown up to any size without getting pixelated like a normal render would. So this could be a small sticker or a garage wall wrap and would still keep the quality.
Follow me on Instagram @vagrantvisuals
Went to pismo this passed weekend. Was a good trip broke in the Kings correctly and broke some other shit. All in all great weekend.
dat ass
had to rep my broness with a monster flag
Sent from my iPhone using Tapatalk
This customer wanted me to polish his paint and get the most defects out as i could as he was putting an exo-cage on this coming week. I honestly have never seen paint as hammered as this. There were tons of trail rash as you can see in the pictures. Lots of deep scratches with a lot of thin...
Not sure who all may be Interested but I bet these would look great on a lowered truck. He says one has light scratches but other than that they're all excellent from his standpoint. Price is a little high but if someone's interested then I'm sure you could work your magic.
They're in the...
Well, it seems the DoD lifter plague hit my car Friday night while in San Antonio, I was able to get the car back home safely yesterday. I'm not positive, but it's most likely a failing lifter. Once I have some free time I will figure it all. Noise seems to be coming from the valve cover area...
auto
baton rouge
beef
black
build
cam
camaro
engine
facebook
heads
how-to
lift
monster
mpg
noise
post
stock
swap
system
truck
tune
upgrade
vette
video
wheels
well as some of you may know, i got rid of my 06 silverado after being irritated with many things on it, so here is the new thread dedicated to the new truck.
here is the readers section of truckin magazine lol
new truck, pretty much every option i could get on a single cab. and yes i wanted...
Got my little 4.8 tuned today. I'm very happy with results. Driveablity is awesome now thanks to Synergy Motorsports in Livermore. But after fighting with my previously Black Bear tuned EMC, it laid down 302RWHP, and 288RWTQ. Definitely not a torque monster, but anything after 3k she pulls well.
FOR SALE: The most bad ass engine you ever freaking saw in your entire lifetime. This bad mother puts out as much power as 473728 clones of yourself all at once. You could put this somebitch in anything! Gotta car? GOOD! Got a truck? EVEN BETTER! Got a prius? Gtfo commie!!!!!
Guys, you want to...
I have begun researching drop information for gm1000s and I thought I’d start throwing the info out there. This will include everything from:
kits we’ve seen people use plus comments and reviews of those kits
other components used
pics with drops
stock tires…rub or no
and ect.
I’ll mainly...
This is my 99 chevy 2500 cc with 7.4 454/4l80e combo with a fresh 50k mile rebuild on motor and trans.
Many people asked me why build a 3/4 ton and I simply reply "why not".
Plans:
Full interior redo
All body work and repaint
Either dropped more or bagged undecided
Rhino line the bed since...
I'm about to completely redo my exhaust. I have pacesetter Lt's and I want to go off those into two 6" dynomax bullets, then into a Y pipe and single 3.5" or 4" back into an xr1.. Now the question is 3.5" pipe or 4" pipe.. 3.5" will be a little cheaper too.
Sent from Tapashit
finally got the truck cleaned up after having my son and was able to get some decent pictures with the gear alloy challenger 737v's installed. they are -19 offset 20x10s I also now have the full 2.25" readylift leveling kit added to the 4.5" zone lift. the angles are still in great shape and not...
Putting this up for sale for a friend, PM me and I will give you his number to workout any details or answer specific questions. The truck is located in Ottumwa Iowa.
2005 GMC Sierra 2500HD
2 Owner Truck
89,000 miles
Leather Seating
Husky floor liners
Power windows, locks, seats, etc...
My trans is starting to give me some trouble, so while its out getting a new Circle D converter, ill be swapping in a built 60e now, rather than later down the road.
im looking at FLT level 3, and 4, or Monster Trans HD 60e.
I will be doing a fair share of towing/hauling with the truck...
Well Since I stole my flt 4l65e from my RCSB to go into my CC late this summer, Im in need of a new trans for the truck. Ive always wanted to switch it over to a 6 speed manual, but with a perfectly good and stout built trans it seemed unnessary.
So plan was to get a T56 and have it built up...
This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
By continuing to use this site, you are consenting to our use of cookies.