installed a JLT oil catch can. Never installed one before so was pretty happy to see how easy it was with the OEM connectors.
2012 Ford Raptor "Build"
- Thread starter SamCarroll
- Start date
both. Im due for an oil change and want to get it analyzed anyway just to know where i stand.
Ive seen too many posts on the FB group about people pulling 2oz of oil out after 2,000 miles so it had me nervous.
Ordered my wheels and tires today.
Wheels finally were able to be sold, they are Raceline 951MC Ryno 17x9 -12mm offset
Tires are Cooper AT3 XLT 37x12.5x17
Wheels finally were able to be sold, they are Raceline 951MC Ryno 17x9 -12mm offset
Tires are Cooper AT3 XLT 37x12.5x17
DirtyBlackHoe
Bun B, Baracca, Beezer
Going to look titties
Sent from my Pixel 2 XL using Tapatalk
Sent from my Pixel 2 XL using Tapatalk
Cooper tires pushed my order out another two months. So I called around and sourced some Toyo RTs, they said last set in CA right now.
Either way I took my time and immediately installed them.
Either way I took my time and immediately installed them.
rebuilds finally came in. Time to swap over to eibach springs and gain an inch in the front.
installed the new shocks and springs. gained 2", its perfect.
ordered a Dirt King heim UCA so i could bring back in my alignment as ford doesnt have much adjustment once you're not stock height. Also to replace the shot OEM UCA. Then my S&B intake showed up.
Needs to settle after being unsprung a bit
Previously had -1.5 degree camber
Needs to settle after being unsprung a bit
Previously had -1.5 degree camber